Skip to Content
2N

GSM/UMTS Gateway for Lifts

2N® EasyGate PRO is a full featured land-line replacement. An analogue GSM/UMTS gateway suited for a lift environment. Connect to it any lift emergency communication system, or use it as an instant replacement of fixed lines via mobile (cellular) solution. In addition, the gateway can make a call for transferring data and SMS messages.

  • Land-line replacement
  • Trouble-free installation
  • Lift monitoring by SMS report
Request information
About

Features & Benefits

  • Land-line replacement
    Take advantage of the 2N® EasyGate as an ideal fixed line replacement for a lift communicator need. You’ll save the monthly fixed-line costs.
  • Trouble-free installation
    Save time when you install thanks to our ‘plug & play’ solution. Configure the advanced features remotely. There’s no waiting for a fixed line to be fitted.
  • Lift monitoring by SMS report
    Check on the condition and functioning of your lifts. Thanks to lift monitoring contact and SMS messages you get an instant overview and can respond to any situation immediately.
  • Event reporting
    A switching contact is available, which can be used to signal an event via the GSM/UMTS gateway. The report is sent by SMS to a pre-set number.
  • Backup power supply
    In the event of a drop in the main power supply the gateway gets its power from the internal battery, guaranteeing operation to exceeding EN 81-28 specification.
  • Notification in case of power failure
    The gateway can send an SMS to inform not only about the failure or restoration of the primary power supply, but also the backup battery status. The battery status information can also be transmitted by P100 or CPC protocols if connected with 2N® Lift1.
  • Simple configuration
    Configuring of the advanced features can be done locally via the USB port or remotely via voice menu (DTMF) or SMS.
  • Zero fixed-line costs
    The 2N® EasyGate can save on the cost of calls made from the lift. It reduced your monthly fixed line costs to zero.
  • Plug & Play installation
    The basic installation consists of inserting a SIM card, entering the PIN code and connecting the existing analogue line device to the appropriate port on the gateway. Your GSM/UMTS gateway is immediately ready to make a call.
Show more
"Our company has been cooperating with 2N in GSM / 3G equipment area for more than 10 years now. We are always pleased to offer 2N products to our customers, because we value the high functionality, performance and reliability of 2N equipment."

Technical Specification

GSM model
GSM networks: 850/900/1800/1900 Mhz
GSM modules: Cinterion MC55i-w
Data: CSD (up to 14.4 kbit/s), GPRS Class 10
SIM card: 3 V and 1.8 V
GSM/UMTS model
GSM networks: 850/900/1800/1900 Mhz
UMTS networks: 900/2100 MHz (EU version), 850/1900 MHz (US version), 850/2100 MHz (Japanese version)
Data: HSDPA 3.6 Mbps, WCDMA, EDGE, GPRS
SIM card: 3 V and 1.8 V
Antenna
Connector type: SMA
Impedance: 50 Ohms
Line interface
Interface type: Two-wire, FXS for phone or external PBX line
Connector type: RJ12, 6/2
Supported modes: DTMF and pulse
Power source
Power unit supplied with the gateway (12 V/1 A)
Option to connect an external 10 to 16 V DC power source
Backup power using 4×AA batteries
USB Interface
Configuration and upgrade using 2N® PC Manager UNI
Other
Dimensions: 163×157×38 mm
Operating temperature: 0°C – 45°C
Operational status signalling: 4×LED (on, GSM network, line, data), LED indicator – signal strength/battery status
Show more
Typical Usage

Where to Buy

To purchase a product locally, please find an authorised partner.
Locate a partner
Technical area

Documents

Marketing materials

Case Study

Example of Typical Connection

Technical Specification

GSM model
GSM networks: 850/900/1800/1900 Mhz
GSM modules: Cinterion MC55i-w
Data: CSD (up to 14.4 kbit/s), GPRS Class 10
SIM card: 3 V and 1.8 V
GSM/UMTS model
GSM networks: 850/900/1800/1900 Mhz
UMTS networks: 900/2100 MHz (EU version), 850/1900 MHz (US version), 850/2100 MHz (Japanese version)
Data: HSDPA 3.6 Mbps, WCDMA, EDGE, GPRS
SIM card: 3 V and 1.8 V
Antenna
Connector type: SMA
Impedance: 50 Ohms
Line interface
Interface type: Two-wire, FXS for phone or external PBX line
Connector type: RJ12, 6/2
Supported modes: DTMF and pulse
Power source
Power unit supplied with the gateway (12 V/1 A)
Option to connect an external 10 to 16 V DC power source
Backup power using 4×AA batteries
USB Interface
Configuration and upgrade using 2N® PC Manager UNI
Other
Dimensions: 163×157×38 mm
Operating temperature: 0°C – 45°C
Operational status signalling: 4×LED (on, GSM network, line, data), LED indicator – signal strength/battery status
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories
SW Applications
Sales Area

Selling Propositions

  • Land-line replacement
    Take advantage of the 2N® EasyGate as an ideal fixed line replacement for a lift communicator need. You’ll save the monthly fixed-line costs.
  • Trouble-free installation
    Save time when you install thanks to our ‘plug & play’ solution. Configure the advanced features remotely. There’s no waiting for a fixed line to be fitted.
  • Lift monitoring by SMS report
    Check on the condition and functioning of your lifts. Thanks to lift monitoring contact and SMS messages you get an instant overview and can respond to any situation immediately.
  • Event reporting
    A switching contact is available, which can be used to signal an event via the GSM/UMTS gateway. The report is sent by SMS to a pre-set number.
  • Backup power supply
    In the event of a drop in the main power supply the gateway gets its power from the internal battery, guaranteeing operation to exceeding EN 81-28 specification.
  • Notification in case of power failure
    The gateway can send an SMS to inform not only about the failure or restoration of the primary power supply, but also the backup battery status. The battery status information can also be transmitted by P100 or CPC protocols if connected with 2N® Lift1.
  • Simple configuration
    Configuring of the advanced features can be done locally via the USB port or remotely via voice menu (DTMF) or SMS.
  • Zero fixed-line costs
    The 2N® EasyGate can save on the cost of calls made from the lift. It reduced your monthly fixed line costs to zero.
  • Plug & Play installation
    The basic installation consists of inserting a SIM card, entering the PIN code and connecting the existing analogue line device to the appropriate port on the gateway. Your GSM/UMTS gateway is immediately ready to make a call.
Show more

Where to Sell

GSM/UMTS gateway for lifts can be used throughout the public and private sectors to help increase physical security and improve your daily life. Choose the area of your interest.
Education
Healthcare
Leisure & Hospitality
Government & Public Sector
Commercial & Corporate Sector
Residential
Transportation & Warehousing
Retail
Industry & Manufacturing

Technical Specification

GSM model
GSM networks: 850/900/1800/1900 Mhz
GSM modules: Cinterion MC55i-w
Data: CSD (up to 14.4 kbit/s), GPRS Class 10
SIM card: 3 V and 1.8 V
GSM/UMTS model
GSM networks: 850/900/1800/1900 Mhz
UMTS networks: 900/2100 MHz (EU version), 850/1900 MHz (US version), 850/2100 MHz (Japanese version)
Data: HSDPA 3.6 Mbps, WCDMA, EDGE, GPRS
SIM card: 3 V and 1.8 V
Antenna
Connector type: SMA
Impedance: 50 Ohms
Line interface
Interface type: Two-wire, FXS for phone or external PBX line
Connector type: RJ12, 6/2
Supported modes: DTMF and pulse
Power source
Power unit supplied with the gateway (12 V/1 A)
Option to connect an external 10 to 16 V DC power source
Backup power using 4×AA batteries
USB Interface
Configuration and upgrade using 2N® PC Manager UNI
Other
Dimensions: 163×157×38 mm
Operating temperature: 0°C – 45°C
Operational status signalling: 4×LED (on, GSM network, line, data), LED indicator – signal strength/battery status
Show more

Documents

Marketing materials
Request information