Skip to Content
2N

2N® EasyGate PRO

The 2N® EasyGate PRO is a single-line analogue GSM gateway that transmits calls and text messages. Connect it to an analogue 2-wire elevator phone and ensure that emergency communication from the elevator is always possible. Or, use it as a replacement for landlines!

  • Reliable emergency elevator calling
  • Landline alternative
  • Power backup
About

Features & Benefits

  • Reliable emergency elevator calling
    Is there an analogue communicator in the elevator, but no landline? Not a problem. Use the 2N® EasyGate PRO for reliable emergency communication with the nominated call centre.
  • Landline alternative
    Don't want to or can't use a landline? Just connect the 2N® EasyGate PRO to an analogue telephone and start making calls right away.
  • Power backup
    No need to worry about unexpected power outages! The gateway has its own power backup of 4 hours standby and 1 hour talk time.
  • Quick installation
    Simply insert your SIM card (remove any PIN), connect your analogue phone and power up the gateway and you're ready to make calls. The gateway doesn’t need any additional configurations.
  • Monitoring via text messages
    The gateway will automatically notify you via a text message if the primary power supply fails, the battery level is low or, it can send another text message based on a predefined event.
  • Signal strength indicator
    LEDs on the 2N® EasyGate PRO inform you about the signal strength. This comes in especially handy when installing it, as you can easily identify the location with the strongest signal.
Show more

Technical Parameters

Cellular network
GSM bands: 850/900/1800/1900 MHz (E, AU)
UMTS bands: 850/900/1900/2100 MHz (AU)
850/1700/1900 MHz (US)
LTE bands: B2/B4/B5/B7/B8/B28/B40 (AU)
B2/B4/B12 (US)
Transmit power: max. 2 W
SIM card: 3 V, 1.8 V
Antenna
Connector type: SMA
Impedance: 50 Ohms
Power supply
Adapter: 100-240 V/12 V; 1 A
Backup power supply: 4xAA batteries
Connection Interface
Interface type: two-wire, FXS for elevator communicator, telephone or external control panel line
Connector type: RJ12, 6/2
Supported options: DTMF and pulse dialling
Tariff pulses: 16/12 kHz
Data interfaces
Communication: GPRS and CSD
Connector: USB Type B
Other
Dimensions: 163×157×38 mm
Operating temperature: 0°C–45°C
Status indication: 4xLED (on, GSM network, line, data)
Signal part/battery status indication: LED indicator
Show more

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Case Study

Reliable emergency elevator calling
Landline alternative

Technical Parameters

Cellular network
GSM bands: 850/900/1800/1900 MHz (E, AU)
UMTS bands: 850/900/1900/2100 MHz (AU)
850/1700/1900 MHz (US)
LTE bands: B2/B4/B5/B7/B8/B28/B40 (AU)
B2/B4/B12 (US)
Transmit power: max. 2 W
SIM card: 3 V, 1.8 V
Antenna
Connector type: SMA
Impedance: 50 Ohms
Power supply
Adapter: 100-240 V/12 V; 1 A
Backup power supply: 4xAA batteries
Connection Interface
Interface type: two-wire, FXS for elevator communicator, telephone or external control panel line
Connector type: RJ12, 6/2
Supported options: DTMF and pulse dialling
Tariff pulses: 16/12 kHz
Data interfaces
Communication: GPRS and CSD
Connector: USB Type B
Other
Dimensions: 163×157×38 mm
Operating temperature: 0°C–45°C
Status indication: 4xLED (on, GSM network, line, data)
Signal part/battery status indication: LED indicator
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Antennas

Omnidirectional Antenna, 2.5dB Gain, SMA Order No.: 22041563 Learn more
Omnidirectional Antenna, 3db Gain, SMA Order No.: 22041562 Learn more
Omnidirectional Antenna, 5dB Gain, SMA Order No.: 22041569 Learn more
Omnidirectional Antenna Stick, 0dB Gain, SMA Order No.: 22041564 Learn more
Omnidirectional Antenna, 9dB Gain, 3m Cable, SMA Order No.: 22041568 Learn more
Omnidirectional Antenna, 9dB Gain, 10m Cable, SMA Order No.: 22041567 Learn more
SW Applications
Sales Area

Selling Propositions

  • Reliable emergency elevator calling
    Is there an analogue communicator in the elevator, but no landline? Not a problem. Use the 2N® EasyGate PRO for reliable emergency communication with the nominated call centre.
  • Landline alternative
    Don't want to or can't use a landline? Just connect the 2N® EasyGate PRO to an analogue telephone and start making calls right away.
  • Power backup
    No need to worry about unexpected power outages! The gateway has its own power backup of 4 hours standby and 1 hour talk time.
  • Quick installation
    Simply insert your SIM card (remove any PIN), connect your analogue phone and power up the gateway and you're ready to make calls. The gateway doesn’t need any additional configurations.
  • Monitoring via text messages
    The gateway will automatically notify you via a text message if the primary power supply fails, the battery level is low or, it can send another text message based on a predefined event.
  • Signal strength indicator
    LEDs on the 2N® EasyGate PRO inform you about the signal strength. This comes in especially handy when installing it, as you can easily identify the location with the strongest signal.
Show more

Technical Parameters

Cellular network
GSM bands: 850/900/1800/1900 MHz (E, AU)
UMTS bands: 850/900/1900/2100 MHz (AU)
850/1700/1900 MHz (US)
LTE bands: B2/B4/B5/B7/B8/B28/B40 (AU)
B2/B4/B12 (US)
Transmit power: max. 2 W
SIM card: 3 V, 1.8 V
Antenna
Connector type: SMA
Impedance: 50 Ohms
Power supply
Adapter: 100-240 V/12 V; 1 A
Backup power supply: 4xAA batteries
Connection Interface
Interface type: two-wire, FXS for elevator communicator, telephone or external control panel line
Connector type: RJ12, 6/2
Supported options: DTMF and pulse dialling
Tariff pulses: 16/12 kHz
Data interfaces
Communication: GPRS and CSD
Connector: USB Type B
Other
Dimensions: 163×157×38 mm
Operating temperature: 0°C–45°C
Status indication: 4xLED (on, GSM network, line, data)
Signal part/battery status indication: LED indicator
Show more
Request information