2N® Access Unit 2.0 Bluetooth & RFID
Use the prevailing and most popular technology for access control systems in combination with modern Bluetooth. All features are elegantly combined in one access unit that reads all the wide-spread RFID cards on the market and simultaneously communicates with your smartphone that can fully and for free substitute these cards.
- Convenience of mobile credentials
- Mobile credentials for FREE
- Multi-frequency RFID card reader
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
Convenience of mobile credentialsApart from RFID cards, a mobile phone can also be used for identification. All a user need is to install the 2N® Mobile Key application in his/her smartphone. The user can then enter the building by tapping the button in the application, or by simply touching the reader.
-
Mobile credentials for FREE2N offers mobile credentials for free! You do not need to pay 5-10USD per each RFID card, neither per mobile credential. Simply install the app and use it without any further fees.
-
Multi-frequency RFID card readerThe access unit reads most of the RFID cards and fobs on the market and ensures a step-by-step transition from obsolete, easy-to-copy 125kHz technology to a smart, more secure 13.56MHz.
-
Remote configuration and managementThe 2N Access Unit 2.0 can be remotely configured via 2N® Remote Configuration cloud servise or administrator can use 2N® Access Commander for bulk management.
-
Security comparable with internet bankingThanks to Bluetooth v4 (BLE) technology and encrypted communication between the access control unit and the 2N® Mobile Key application, your access credentials cannot be misused.
-
Easily installed edge deviceA single ethernet cable, Power over Ethernet, and the option to connect a door strike, exit button, or door contact directly to the unit make installation very simple.
-
Time & attendance terminalThe 2N Access Unit 2.0 works as a T&A terminal recording all your employees’ arrivals and departures. These information are sent to 2N® Access Commander where can be seen in graphical form.
-
Straight forward pairing processYou simply pair your smartphone with the access control unit in just three steps. To pair with several units at once, use the 2N® Access Commander.
-
Door protected from both sidesOther additional modules such as RFID reader, keypad, fingerprint or Bluetooth can be connected to the 2N Access Unit 2.0, allowing you to secure a door from both sides.
-
Web interface administrationSimply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
Show more
Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12V/1A DC |
| PoE: | 802.3af (Class 0–12.95W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12V DC/max 600mA |
| Passive switch: | NO/NC contacts, up to 30V/1A AC/DC |
| Inputs: | 2 inputs - in passive/active mode (-30V to +30V DC) |
| OFF = open or Uin> 1.5V | |
| ON = short-circuit or Uin< 1.5V | |
| Tamper switch: | native part of the 2N Access Unit 2.0 |
| Audio: | buzzer (97dBA) and microphone |
| Supported protocols: | DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog |
| Bluetooth reader | |
| Version: | compatible with Bluetooth 4.0 or higher (BLE) |
| Range: | adjustable (short ~ 0.5m, medium ~ 2m, long ~ up to 10m) |
| Security: | RSA-1024 and AES-128 encryption |
| RX sensitivity: | up to -93dBm |
| Mobile application support | |
| Android 6.0 and higher, iOS 11.0 and higher | |
| RFID card reader | |
| Supported frequencies: | 125kHz and 13.56MHz |
| 125kHz: | EM4100, EM4102, HID Prox |
| 13.56MHz: | ISO14443A, ISO14443B, NFC support |
| reads UID (CSN) | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Mechanical properties | |
| Frame: | robust zinc cast frame with surface finish (nickel and black color) |
| Operating temperature: | -40°C to +60°C |
| Storage temperature: | -40°C to +70°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Dimensions: | Wall (surface) mounting frame: |
| - 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
| Flush mounting frame: | |
| - 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
| Flush mounting box (minimum hole): | |
| - 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
| Weight: | max 0.8kg |
| Cover rating: | IP54 and IK08 |
| Extension modules | |
| 2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc. | |
Show more
Typical Usage
2N Access Units 2.0 Introduction
Get to know the features, capabilities and unique benefits of multitechnology 2N IP access control readers.
Watch the video Where to Buy
To purchase a product locally, please find an authorised distributor.
Locate a distributor Technical area 
Case Study
Example of Typical Connection
FAQ
Are you still looking for more information? Check out the frequently asked questions and answers.
See more Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12V/1A DC |
| PoE: | 802.3af (Class 0–12.95W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12V DC/max 600mA |
| Passive switch: | NO/NC contacts, up to 30V/1A AC/DC |
| Inputs: | 2 inputs - in passive/active mode (-30V to +30V DC) |
| OFF = open or Uin> 1.5V | |
| ON = short-circuit or Uin< 1.5V | |
| Tamper switch: | native part of the 2N Access Unit 2.0 |
| Audio: | buzzer (97dBA) and microphone |
| Supported protocols: | DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog |
| Bluetooth reader | |
| Version: | compatible with Bluetooth 4.0 or higher (BLE) |
| Range: | adjustable (short ~ 0.5m, medium ~ 2m, long ~ up to 10m) |
| Security: | RSA-1024 and AES-128 encryption |
| RX sensitivity: | up to -93dBm |
| Mobile application support | |
| Android 6.0 and higher, iOS 11.0 and higher | |
| RFID card reader | |
| Supported frequencies: | 125kHz and 13.56MHz |
| 125kHz: | EM4100, EM4102, HID Prox |
| 13.56MHz: | ISO14443A, ISO14443B, NFC support |
| reads UID (CSN) | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Mechanical properties | |
| Frame: | robust zinc cast frame with surface finish (nickel and black color) |
| Operating temperature: | -40°C to +60°C |
| Storage temperature: | -40°C to +70°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Dimensions: | Wall (surface) mounting frame: |
| - 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
| Flush mounting frame: | |
| - 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
| Flush mounting box (minimum hole): | |
| - 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
| Weight: | max 0.8kg |
| Cover rating: | IP54 and IK08 |
| Extension modules | |
| 2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc. | |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area
Request information Selling Propositions
- Convenience of mobile credentialsApart from RFID cards, a mobile phone can also be used for identification. All a user need is to install the 2N® Mobile Key application in his/her smartphone. The user can then enter the building by tapping the button in the application, or by simply touching the reader.
- Mobile credentials for FREE2N offers mobile credentials for free! You do not need to pay 5-10USD per each RFID card, neither per mobile credential. Simply install the app and use it without any further fees.
- Multi-frequency RFID card readerThe access unit reads most of the RFID cards and fobs on the market and ensures a step-by-step transition from obsolete, easy-to-copy 125kHz technology to a smart, more secure 13.56MHz.
- Remote configuration and managementThe 2N Access Unit 2.0 can be remotely configured via 2N® Remote Configuration cloud servise or administrator can use 2N® Access Commander for bulk management.
- Security comparable with internet bankingThanks to Bluetooth v4 (BLE) technology and encrypted communication between the access control unit and the 2N® Mobile Key application, your access credentials cannot be misused.
- Easily installed edge deviceA single ethernet cable, Power over Ethernet, and the option to connect a door strike, exit button, or door contact directly to the unit make installation very simple.
- Time & attendance terminalThe 2N Access Unit 2.0 works as a T&A terminal recording all your employees’ arrivals and departures. These information are sent to 2N® Access Commander where can be seen in graphical form.
- Straight forward pairing processYou simply pair your smartphone with the access control unit in just three steps. To pair with several units at once, use the 2N® Access Commander.
- Door protected from both sidesOther additional modules such as RFID reader, keypad, fingerprint or Bluetooth can be connected to the 2N Access Unit 2.0, allowing you to secure a door from both sides.
- Web interface administrationSimply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
Show more
Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12V/1A DC |
| PoE: | 802.3af (Class 0–12.95W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12V DC/max 600mA |
| Passive switch: | NO/NC contacts, up to 30V/1A AC/DC |
| Inputs: | 2 inputs - in passive/active mode (-30V to +30V DC) |
| OFF = open or Uin> 1.5V | |
| ON = short-circuit or Uin< 1.5V | |
| Tamper switch: | native part of the 2N Access Unit 2.0 |
| Audio: | buzzer (97dBA) and microphone |
| Supported protocols: | DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog |
| Bluetooth reader | |
| Version: | compatible with Bluetooth 4.0 or higher (BLE) |
| Range: | adjustable (short ~ 0.5m, medium ~ 2m, long ~ up to 10m) |
| Security: | RSA-1024 and AES-128 encryption |
| RX sensitivity: | up to -93dBm |
| Mobile application support | |
| Android 6.0 and higher, iOS 11.0 and higher | |
| RFID card reader | |
| Supported frequencies: | 125kHz and 13.56MHz |
| 125kHz: | EM4100, EM4102, HID Prox |
| 13.56MHz: | ISO14443A, ISO14443B, NFC support |
| reads UID (CSN) | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Mechanical properties | |
| Frame: | robust zinc cast frame with surface finish (nickel and black color) |
| Operating temperature: | -40°C to +60°C |
| Storage temperature: | -40°C to +70°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Dimensions: | Wall (surface) mounting frame: |
| - 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
| Flush mounting frame: | |
| - 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
| Flush mounting box (minimum hole): | |
| - 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
| Weight: | max 0.8kg |
| Cover rating: | IP54 and IK08 |
| Extension modules | |
| 2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc. | |
Show more
