2N® Access Unit QR
Please note, the 2N Access Unit QR will be available in the Americas and APAC from May 1st 2024
More secure than PIN codes, and cheaper and more sustainable than RFID cards – what’s not to love about QR code access? The 2N® Access Unit QR provides quick, secure access using mobile phones and is perfect for visitors!
- Frictionless visitor experience
- The best temporary access
- Reduced administrative overheads
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
Frictionless visitor experienceEnhance the visitor experience by allowing receptionists to email a QR code in advance for mobile access control. No more remembering PIN codes or waiting at the desk for a temporary RFID card.
-
The best temporary accessWhether it’s one-off entry, time-limited access, or just a certain number of visits - QR codes are the best credential for guests, providing convenience for visitors and flexibility for admins.
-
Reduced administrative overheadsGenerate QR codes and share them in bulk with multiple users via email with a few clicks in the 2N® Access Commander. Or, use third-party software when integrating with another access platform.
-
Complete flexibilityThe modular design of the reader allows you to add another access module (e.g. Touch keypad, Bluetooth & RFID), offering more flexibility for visitors as well as permanent options for personnel.
-
Free, more sustainable credentialsReduce plastic waste and your spending: QR codes are free and eliminate the costs associated with the purchase of physical credentials, their handling, issuing, and eventual disposal.
-
Full HD camera enhances securitySupplement access logs in the 2N® Access Commander with snapshots captured by the reader's camera. Or fully integrate the reader into your VMS and use it as a full-featured camera.
Show more
Technical Parameters
| Power supply | |
| Type | PoE and/or 12 V/1 A DC |
| PoE | 802.3af (Class 0–12.95 W) |
| Interfaces | |
| LAN | 10/100BASE-TX with Auto-MDIX, RJ-45 jack |
| Recommended cabling | Cat-5e or better |
| Active switch output | 8 to 12 V DC/max 400 mA |
| Passive switch | NO/NC contacts, up to 30 V/1 A AC/DC |
| Inputs | 1 input - in passive/active mode (-30 V to +30 V DC) OFF = open or Uin> 1.5 V ON = short-circuit or Uin< 1.5 V |
| Tamper switch | optional (extension module) |
| Audio | |
| Microphone | 1 integrated |
| Amplifier | 5 W (Class D) |
| Speaker | 2 W / 8 Ω |
| Sound Pressure Level (SPL max) | 78 dB (for 1 kHz at 3.281 ft.) |
| LINE OUT | 1 VRMS / 600 Ω |
| Volume control | adjustable with automatic adaptive mode |
| Full duplex | Yes (AEC) |
| Audio output | 1,9 W |
| Protocols | RTP/SRTP |
| Codecs | G.711, G.729, G.722, L16/16kHz |
| Camera & video | |
| Sensor | 1/2.7’’ colour CMOS |
| Focal lenght | 0.075 inch |
| View angle | 125° (H), 105° (V) |
| View angle “peephole" | 138° (H), 105° (V) |
| Infrared light | yes |
| WDR | yes |
| Minimal illumination | 0,8 lux without IR illumination |
| Protocols | RTP/RTSP/RTCP/HTTP, ONVIF v2.4 profile S & T |
| Codecs | H.264, MJPEG, Zipstream |
| Resolution H.264, MJPEG | max. FullHD (1920 x 1080) |
| Frame rate | max. 30 fps |
| QR code specifications | |
| Type | static QR containing 4-15 digits (decimal, hexadecimal characters) |
| Versions | 1 - 40 (all the versions supported) |
| Others | QR code can be coloured and can contain an image |
| Mechanical Properties | |
| Frame (cover) | robust zinc cast frame with surface finish (nickel and black color) |
| Operating temperature | -40°F to + 140°F |
| Storage temperature | -40°F to +158°F |
| Operating relative humidity | 10%-95% (non-condensing) |
| Weight | 4.41 pounds |
| Cover rating | IP54 and IK08 |
| Dimensions | |
| Surface mounting frame (2 modules) | 4.213 (W) x 9.213 (H) x 1.102 (D) inch |
| Flush mounting frame (2 modules) | 5.118 (W) x 10.118 (H) x 0.197 (D) inch |
| Flush mounting box (2 modules) | 4.252 (W) x 9.37 (H) x 1.772 (D) inch |
| Extension modules | |
| Modules | 2N® Access Unit QR supports all modules from the 2N® IP Verso 2.0 intercom |
| Warranty | |
| 5-years warranty see /en_US/support/warranty-repairs |
|
Show more
Try out the 2N Project Designer
Simply enter your requirements and our intuitive project planning tool will help you choose the right products.
Typical solutions
Technical area ![]()
FAQ
Are you still looking for more information? Check out the frequently asked questions and answers.
See more Technical Parameters
| Power supply | |
| Type | PoE and/or 12 V/1 A DC |
| PoE | 802.3af (Class 0–12.95 W) |
| Interfaces | |
| LAN | 10/100BASE-TX with Auto-MDIX, RJ-45 jack |
| Recommended cabling | Cat-5e or better |
| Active switch output | 8 to 12 V DC/max 400 mA |
| Passive switch | NO/NC contacts, up to 30 V/1 A AC/DC |
| Inputs | 1 input - in passive/active mode (-30 V to +30 V DC) OFF = open or Uin> 1.5 V ON = short-circuit or Uin< 1.5 V |
| Tamper switch | optional (extension module) |
| Audio | |
| Microphone | 1 integrated |
| Amplifier | 5 W (Class D) |
| Speaker | 2 W / 8 Ω |
| Sound Pressure Level (SPL max) | 78 dB (for 1 kHz at 3.281 ft.) |
| LINE OUT | 1 VRMS / 600 Ω |
| Volume control | adjustable with automatic adaptive mode |
| Full duplex | Yes (AEC) |
| Audio output | 1,9 W |
| Protocols | RTP/SRTP |
| Codecs | G.711, G.729, G.722, L16/16kHz |
| Camera & video | |
| Sensor | 1/2.7’’ colour CMOS |
| Focal lenght | 0.075 inch |
| View angle | 125° (H), 105° (V) |
| View angle “peephole" | 138° (H), 105° (V) |
| Infrared light | yes |
| WDR | yes |
| Minimal illumination | 0,8 lux without IR illumination |
| Protocols | RTP/RTSP/RTCP/HTTP, ONVIF v2.4 profile S & T |
| Codecs | H.264, MJPEG, Zipstream |
| Resolution H.264, MJPEG | max. FullHD (1920 x 1080) |
| Frame rate | max. 30 fps |
| QR code specifications | |
| Type | static QR containing 4-15 digits (decimal, hexadecimal characters) |
| Versions | 1 - 40 (all the versions supported) |
| Others | QR code can be coloured and can contain an image |
| Mechanical Properties | |
| Frame (cover) | robust zinc cast frame with surface finish (nickel and black color) |
| Operating temperature | -40°F to + 140°F |
| Storage temperature | -40°F to +158°F |
| Operating relative humidity | 10%-95% (non-condensing) |
| Weight | 4.41 pounds |
| Cover rating | IP54 and IK08 |
| Dimensions | |
| Surface mounting frame (2 modules) | 4.213 (W) x 9.213 (H) x 1.102 (D) inch |
| Flush mounting frame (2 modules) | 5.118 (W) x 10.118 (H) x 0.197 (D) inch |
| Flush mounting box (2 modules) | 4.252 (W) x 9.37 (H) x 1.772 (D) inch |
| Extension modules | |
| Modules | 2N® Access Unit QR supports all modules from the 2N® IP Verso 2.0 intercom |
| Warranty | |
| 5-years warranty see /en_US/support/warranty-repairs | |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area
Request information Selling Propositions
- Frictionless visitor experienceEnhance the visitor experience by allowing receptionists to email a QR code in advance for mobile access control. No more remembering PIN codes or waiting at the desk for a temporary RFID card.
- The best temporary accessWhether it’s one-off entry, time-limited access, or just a certain number of visits - QR codes are the best credential for guests, providing convenience for visitors and flexibility for admins.
- Reduced administrative overheadsGenerate QR codes and share them in bulk with multiple users via email with a few clicks in the 2N® Access Commander. Or, use third-party software when integrating with another access platform.
- Complete flexibilityThe modular design of the reader allows you to add another access module (e.g. Touch keypad, Bluetooth & RFID), offering more flexibility for visitors as well as permanent options for personnel.
- Free, more sustainable credentialsReduce plastic waste and your spending: QR codes are free and eliminate the costs associated with the purchase of physical credentials, their handling, issuing, and eventual disposal.
- Full HD camera enhances securitySupplement access logs in the 2N® Access Commander with snapshots captured by the reader's camera. Or fully integrate the reader into your VMS and use it as a full-featured camera.
Show more
Try out the 2N Project Designer
Simply enter your requirements and our intuitive project planning tool will help you choose the right products.
Technical Parameters
| Power supply | |
| Type | PoE and/or 12 V/1 A DC |
| PoE | 802.3af (Class 0–12.95 W) |
| Interfaces | |
| LAN | 10/100BASE-TX with Auto-MDIX, RJ-45 jack |
| Recommended cabling | Cat-5e or better |
| Active switch output | 8 to 12 V DC/max 400 mA |
| Passive switch | NO/NC contacts, up to 30 V/1 A AC/DC |
| Inputs | 1 input - in passive/active mode (-30 V to +30 V DC) OFF = open or Uin> 1.5 V ON = short-circuit or Uin< 1.5 V |
| Tamper switch | optional (extension module) |
| Audio | |
| Microphone | 1 integrated |
| Amplifier | 5 W (Class D) |
| Speaker | 2 W / 8 Ω |
| Sound Pressure Level (SPL max) | 78 dB (for 1 kHz at 3.281 ft.) |
| LINE OUT | 1 VRMS / 600 Ω |
| Volume control | adjustable with automatic adaptive mode |
| Full duplex | Yes (AEC) |
| Audio output | 1,9 W |
| Protocols | RTP/SRTP |
| Codecs | G.711, G.729, G.722, L16/16kHz |
| Camera & video | |
| Sensor | 1/2.7’’ colour CMOS |
| Focal lenght | 0.075 inch |
| View angle | 125° (H), 105° (V) |
| View angle “peephole" | 138° (H), 105° (V) |
| Infrared light | yes |
| WDR | yes |
| Minimal illumination | 0,8 lux without IR illumination |
| Protocols | RTP/RTSP/RTCP/HTTP, ONVIF v2.4 profile S & T |
| Codecs | H.264, MJPEG, Zipstream |
| Resolution H.264, MJPEG | max. FullHD (1920 x 1080) |
| Frame rate | max. 30 fps |
| QR code specifications | |
| Type | static QR containing 4-15 digits (decimal, hexadecimal characters) |
| Versions | 1 - 40 (all the versions supported) |
| Others | QR code can be coloured and can contain an image |
| Mechanical Properties | |
| Frame (cover) | robust zinc cast frame with surface finish (nickel and black color) |
| Operating temperature | -40°F to + 140°F |
| Storage temperature | -40°F to +158°F |
| Operating relative humidity | 10%-95% (non-condensing) |
| Weight | 4.41 pounds |
| Cover rating | IP54 and IK08 |
| Dimensions | |
| Surface mounting frame (2 modules) | 4.213 (W) x 9.213 (H) x 1.102 (D) inch |
| Flush mounting frame (2 modules) | 5.118 (W) x 10.118 (H) x 0.197 (D) inch |
| Flush mounting box (2 modules) | 4.252 (W) x 9.37 (H) x 1.772 (D) inch |
| Extension modules | |
| Modules | 2N® Access Unit QR supports all modules from the 2N® IP Verso 2.0 intercom |
| Warranty | |
| 5-years warranty see /en_US/support/warranty-repairs | |
Show more
WHERE CAN I BUY 2N PRODUCTS?
You can purchase these products from our authorised distributors.
Locate a distributor