2N® Access Unit 2.0 Touch keypad, Bluetooth & RFID
Номер заказа: 9160347/9160347-S (secured)
Этот универсальный умный считыватель объединяет три технологии доступа в одном устройстве и предлагает пользователям максимальную гибкость. Дополните набирающий популярность мобильный доступ резервными вариантами, такими как PIN-коды, на случай, если, например, жильцы придут домой, а в их телефоне разрядится батарейка. Приверженцы традиций могут по-прежнему использовать RFID-карты, которые также могут быть зашифрованы с помощью технологии 2N® PICard. Это особенно полезно в офисных проектах. Datasheets (EN)
- 3 технологии доступа в одном считывателе
- Мобильный доступ и резервный PIN-код доступ
- Совместимость с технологией 2N® PICard
Technical Parameters
Power supply | |
Type | PoE and/or 12 V/1 A DC |
PoE | 802.3af (Class 0–12.95 W) |
Interfaces | |
LAN | 10/100BASE-TX with Auto-MDIX, RJ-45 jack |
Recommended cabling | Cat-5e or better |
Active switch output | 8 to 12 V DC/max 600 mA |
Passive switch | NO/NC contacts, up to 30 V/1 A AC/DC |
Inputs | 2 inputs - in passive/active mode (-30 V to +30 V DC) |
OFF = open or Uin> 1.5 V | |
ON = short-circuit or Uin< 1.5 V | |
Tamper switch | native part of the 2N Access Unit 2.0 |
Audio | buzzer (97dBA) |
Supported protocols | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
Bluetooth Reader | |
Version | compatible with Bluetooth 5.0 (BLE) |
Range | (short - typically up to 3m*, long - typically up to 10m*) |
*distances should serve only as an approximate guide and may vary depending on the phone model and installation environment | |
Security | RSA-1024 and AES-128 encryption |
RX sensitivity | up to -93 dBm |
Mode | touch, tap in app, card |
Mobile Application Support | |
Android 6.0 and higher, iOS 12.0 and higher |
RFID Card Reader | |
Supported frequencies | 125 kHz variant |
13.56 MHz variant | |
125 kHz and 13.56 MHz variant | |
Supported card types | card type compatibility depends on Order No. |
125 kHz | EM4xxx |
HID Prox – versions with 125 kHz support and S in Order No. Only | |
13.56 MHz | ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key) |
reads UID (CSN) and secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
Secured 13.56 MHz | ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE) |
reads secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
reads PACs ID (HID iClass cards with SIO object) | |
Touch Keypad | |
Technology | capacitive touch layer (sensitivity 0,1 pF) |
Reliability | regular automatic calibration (SmartSence Auto-tunning) |
does not detect false touches on wet surface | |
Signalling | configurable backlight intensity |
indication using multicoloured LEDs | |
acoustic response for every keypad touch | |
Mechanical Properties | |
Frame | robust zinc cast frame with surface finish (nickel and black color) |
Operating temperature | -40°C to +60°C |
Storage temperature | -40°C to +70°C |
Operating relative humidity | 10%-95% (non-condensing) |
Dimensions | Wall (surface) mounting frame: |
- 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
Flush mounting frame: | |
- 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
Flush mounting box (minimum hole): | |
- 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
Weight | max 0.8 kg |
Cover rating | IP54 and IK08 |
Extension Modules | |
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID, Bluetooth and fingerprint readers, keypad, I/O module, Wiegand, etc. |
Показать больше