Skip to Content
2N

2N Floor Announciator

2N® Floor Announciator is a communication device designed to be installed in the lift cabin. Its main function is to inform people of the current floor number whenever the lift stops. Apart from announcing the floors it also advises of the ensuing direction and draws attention to the closing or opening of the doors, as well as other configurable events.

  • Multilingual reporting
  • Custom announcements option
  • Simple and versatile installation
Request information Where to Buy
About

Features & Benefits

  • Multilingual reporting
    Make use of multi-lingual announcements. You can customize the messages to your requirements or add additional languages.
  • Custom announcements option
    Set your own announcements of selected events or make use of the lift communicator for commercial messages.
  • Simple and versatile installation
    The 2N® Floor Announciator handles the selected source data to process from any of six possible input formats, and based on event settings issues the due information.
  • Simple configuration
    Switches on the Floor Announciator save time and simplify the configuration for the installation technician.
  • Announcement combinations
    2N® Floor Announciator offers complete sets of information in several languages. You can also combine these at will.
  • Adjustable user and commercial messages
    Upload your own communications or change the announcements as needed.
  • Support for different data sources
    Take advantage of up to 6 data source types that prompt the respective announcements.
  • Lift cabin location and status messages
    Identifies the floor and direction of movement, informs about cabin status, overloading, breakdowns or door open/closing – all at your disposal.
  • Standards and certifications
    The high quality design and compatibility with the required standards is evidenced by TÜV certification EN 81-28/70.
Show more

Technical Specification

Dimensions: 80 x 90 x 25mm
Serial PC interface: RS232C, max. 115200bits/s, automatic negotiation
Fuse: T 400mA for 25Ω or 16Ω speaker
Weight: 380g
Parallel inputs: ‘0 and 1’ levels: ‘0’ – 0V to 2V, ‘1’ – 10V to 24V
‘pull up’ resistors: 10kΩ to the positive supply voltage
Control contact: ‘0’ resistance to earth < 800Ω, 24V; ‘1’ resistance to earth > 10kΩ, 24V
Max power: +/-40V to positive supply voltage
Serial input: Anticipated wake on open collector to earth, current drawn from the positive at about 3mA
Power supply (not included): DC 9-30V recommended DC 12-24V
Power drain Max 300mA (16Ω speaker)
Power output 0.5W / 16Ω
Supported interfaces: Serial 8-bit, Serial 9-bit, Serial multi-bit, Parallel binary code, Parallel Gray code, Parallel 8 bit
Show more

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentation
Software & firmware

Case Study

Example of Typical Connection

Technical Specification

Dimensions: 80 x 90 x 25mm
Serial PC interface: RS232C, max. 115200bits/s, automatic negotiation
Fuse: T 400mA for 25Ω or 16Ω speaker
Weight: 380g
Parallel inputs: ‘0 and 1’ levels: ‘0’ – 0V to 2V, ‘1’ – 10V to 24V
‘pull up’ resistors: 10kΩ to the positive supply voltage
Control contact: ‘0’ resistance to earth < 800Ω, 24V; ‘1’ resistance to earth > 10kΩ, 24V
Max power: +/-40V to positive supply voltage
Serial input: Anticipated wake on open collector to earth, current drawn from the positive at about 3mA
Power supply (not included): DC 9-30V recommended DC 12-24V
Power drain Max 300mA (16Ω speaker)
Power output 0.5W / 16Ω
Supported interfaces: Serial 8-bit, Serial 9-bit, Serial multi-bit, Parallel binary code, Parallel Gray code, Parallel 8 bit
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories
SW Applications
Sales Area

Selling Propositions

  • Multilingual reporting
    Make use of multi-lingual announcements. You can customize the messages to your requirements or add additional languages.
  • Custom announcements option
    Set your own announcements of selected events or make use of the lift communicator for commercial messages.
  • Simple and versatile installation
    The 2N® Floor Announciator handles the selected source data to process from any of six possible input formats, and based on event settings issues the due information.
  • Simple configuration
    Switches on the Floor Announciator save time and simplify the configuration for the installation technician.
  • Announcement combinations
    2N® Floor Announciator offers complete sets of information in several languages. You can also combine these at will.
  • Adjustable user and commercial messages
    Upload your own communications or change the announcements as needed.
  • Support for different data sources
    Take advantage of up to 6 data source types that prompt the respective announcements.
  • Lift cabin location and status messages
    Identifies the floor and direction of movement, informs about cabin status, overloading, breakdowns or door open/closing – all at your disposal.
  • Standards and certifications
    The high quality design and compatibility with the required standards is evidenced by TÜV certification EN 81-28/70.
Show more

Related norms and certificates

The quality of our products is crucial to us and our customers, which is why they fully comply with strict European Union standards.

Technical Specification

Dimensions: 80 x 90 x 25mm
Serial PC interface: RS232C, max. 115200bits/s, automatic negotiation
Fuse: T 400mA for 25Ω or 16Ω speaker
Weight: 380g
Parallel inputs: ‘0 and 1’ levels: ‘0’ – 0V to 2V, ‘1’ – 10V to 24V
‘pull up’ resistors: 10kΩ to the positive supply voltage
Control contact: ‘0’ resistance to earth < 800Ω, 24V; ‘1’ resistance to earth > 10kΩ, 24V
Max power: +/-40V to positive supply voltage
Serial input: Anticipated wake on open collector to earth, current drawn from the positive at about 3mA
Power supply (not included): DC 9-30V recommended DC 12-24V
Power drain Max 300mA (16Ω speaker)
Power output 0.5W / 16Ω
Supported interfaces: Serial 8-bit, Serial 9-bit, Serial multi-bit, Parallel binary code, Parallel Gray code, Parallel 8 bit
Show more

Documents

Marketing documentation
Software & firmware
Request information