2N® SIP Audio Converter

Connect your Public Address to your telephone system and use it to make announcements via your mobile phone. 2N® SIP Audio Converter converts the sound from a SIP phone system to the classic analogue form so you can broadcast live or pre-recorded messages over the IP network to any distance.

  • Two-way communicator
  • Multicast broadcasting
  • Built-in relay
Request information Where to buy

Features & Benefits

  • Two-way Communicator
    Use the Converter with an external speaker as a simple Public Address system or with a microphone as a two-way communicator on the principle of a simple IP intercom.
  • Multicast broadcasting
    Broadcast to an unlimited number of end devices, all without burdening your LAN/WAN with redundant data-streams.
  • Built-in relay
    External devices can be controlled using the relay or you can use it as a priority switch (override mode).
  • Powerful amplifier
    2N® SIP Audio Converter has a built-in amplifier with an output of 2x10 W so it can easily be connected to a speaker without the need of an external amplifier.
  • Calling
    By connecting a microphone and a switch button you can call up to three pre-set numbers.
  • Simple installation and configuration
    Connect the converter to an existing LAN/WAN network. The actual configuration of the device is performed in a clean web interface.
  • Informacast protocol support
    The Informacast protocol allows for spoken or sound recording play back from Cisco devices.
  • Integration into other systems
    You can easily integrate the 2N® SIP Audio Converter into third-party systems such as video monitoring systems or IP telephony.
Show more
"Audio over IP was previously an unknown area for Edwards Sound. Initial hesitation was cast aside after a hands on demo and our first few installations taught us a lot more about the 2N product and its many features. We have been able to solve a lot of problems for our customers with 2N that previously would have been too expensive or simply not possible with existing 100v technology. The product range offers a solution to every problem and we are excited about working with 2N into the future."
"Received the goods last week. This stuff is awesome!! Audio over IP has come a long way since I last bought devices 4 years ago."

Compatibility with Global Technology Partners

Get to know the wide range of technologies which are compatible with our products.

Technical Parameters

Amplifier properties
Amplifier outputs: 4x connector on the rear panel, STEREO/MONO with autodetect
Loudspeaker impedance: 4-8Ω
Amplifier output: Up to 2x10W subject to connection type
Frequency range: 20Hz – 20kHz (+/- 0.5dB)
Harmonic distortion: 0.05% @ 1kHz
Signal-to-noise ratio: 91dB
Status signalling: 3x RG LED on the front panel
Local control: 3x Button on the front panel
Remote control: 1 x Infrared sensor on the front panel
LAN connection: RJ-45 connector on the back panel, 10/100BASE-TX with Auto-MDIX function
Headphone/Line output: 1x 3.5mm STEREO jack on the front panel
Microphone/Line input: 1x 3.5mm STEREO jack on the front panel
Power supply
Power from an external source: 12V DC / 1.8A
Power over Ethernet: PoE IEEE 802.3af
Output for add-on speakers
PoE: 1 x 4 Ohm (10W)
1 x 8 Ohm (10W)
2 x 4 Ohm (2x5W)
2 x 8 Ohm (2x5W)
12V: 1 x 4 Ohm (18W)
1 x 8 Ohm (12W)
2 x 4 Ohm (2x10W)
2 x 8 Ohm (2x9W)
Dimensions and weight
Dimensions: 105 x 34 x 86mm
Dimensions (with L-profiles): 130 x 34 x 86mm
Weight: 300g
Operating temperature
Temperature range: 0°C – 50°C
Show more

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor