Skip to Content
2N

2N® Access Unit 2.0 Touch Keypad & RFID

2N® Access Unit 2.0 Touch Keypad & RFID is a compact access control unit equipped with an RFID card reader and touch keypad. The unit has a multi-frequency RFID card reader that allows using both older 125kHz cards and smart and secure 13.56MHz ones and thus covers functions of three separate access units. The device is intended for indoor and outdoor installations.

  • Transition to smart and secured cards
  • Smart automatic calibration
  • Two-factor authentication
Request information Where to buy
About

Features & Benefits

  • Transition to smart and secured cards
    Ensure a step-by-step transition from obsolete, easy-to-copy 125kHz technology to a smart, secure 13.56MHz technology without the need for a high one-time investment.
  • Smart automatic calibration
    With regular automatic calibration, the unit reliably registers and evaluates each touch and prevents detection of unwanted or false touches (e.g. raindrops).
  • Two-factor authentication
    For an extra level of security, two-factor authentication can be set requiring users to confirm their identity by combining the RFID badge with a PIN code.
  • Remote configuration and management
    The 2N Access Unit 2.0 can be remotely configured via 2N® Remote Configuration cloud service or administrator can use 2N® Access Commander for bulk management.
  • Easily installed edge device
    A single ethernet cable, Power over Ethernet, and the option to connect a door strike, exit button, or door contact directly to the unit make installation very simple.
  • Silent alarm
    A unique code can be set on the unit that opens the door, but also triggers another action without warning the intruder, such as setting off an alarm at the building security control centre.
  • Guaranteed visibility even at night
    Thanks to backlighting with adjustable brightness, visibility of the keypad is ensured even at night or in places with minimal lighting.
  • Notification of incorrect PIN entry
    If anybody repeatedly enters an incorrect PIN to get into the building, the 2N Access Unit immediately notifies the administrator and blocks the keypad.
  • Time & attendance terminal
    The 2N Access Unit 2.0 works as a T&A terminal recording all your employees’ arrivals and departures. These information are sent to 2N® Access Commander where can be seen in graphical form.
  • NFC support
    Thanks to wireless NFC technology, you can also easily open the door using a smartphone with Android OS and the 2N® Mobile Key application installed.
Show more

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
RFID card reader
Supported frequencies: 125kHz and 13.56MHz
125kHz: EM4100, EM4102, HID Prox
13.56MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more
Typical Usage

2N Access Units 2.0 Introduction

Get to know the features, capabilities and unique benefits of multitechnology 2N IP access control readers.
Watch the video

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentation

Case Study

Example of Typical Connection

FAQ

Are you still looking for more information? Check out the frequently asked questions and answers.
See more

Licenses

Find out the detailed description of product licensing policy.
See more

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
RFID card reader
Supported frequencies: 125kHz and 13.56MHz
125kHz: EM4100, EM4102, HID Prox
13.56MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Mounting Accessories

Frame for Installation on the Surface - 1 Module Order No.: 9155021 (nickel) / 9155021B (black) Learn more
Frame for Installation in the Wall - 1 Module Order No.: 9155011 (nickel) / 9155011B (black) Learn more
Box for Installation in the Wall - 1 Module Order No.: 9155014 Learn more
Backplate – 1 Module Order No.: 9155061 Learn more

Extension Modules

Fingerprint Reader Order No.: 9155045 Learn more
Keypad Order No.: 9155031 (nickel) / 9155031B (black) Learn more
Bluetooth & RFID Reader 125kHz, 13.56MHz, NFC Order No.: 9155082 Learn more
Bluetooth & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 9155084 Learn more
Touch Keypad & RFID Reader 125kHz, 13.56MHz, NFC Order No.: 9155081 Learn more
Touch Keypad & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 9155083 Learn more
Bluetooth Reader Order No.: 9155046 Learn more
Touch Keypad Order No.: 9155047 Learn more
RFID Card Reader 125kHz Order No.: 9155032 Learn more
RFID Card Reader 13.56MHz NFC Order No.: 9155040 Learn more
Secured RFID Card Reader 13.56 MHz NFC Order No.: 9155086 Learn more
Touch Display Order No.: 9155036 Learn more
I/O Module Order No.: 9155034 Learn more
Wiegand Module Order No.: 9155037 Learn more
Extension Cable 1m Order No.: 9155050 Learn more
Extension Cable 3m Order No.: 9155054 Learn more
Extension Cable 5m Order No.: 9155055 Learn more

Other Accessories

External IP Relay - 1 Output, 1 Input Order No.: 9137410E Learn more
Exit Button Order No.: 9159013 Learn more
Magnetic Door Contact Order No.: 9159012 Learn more
2N® 2Wire Order No.: 9159014EU Learn more
Security Relay Order No.: 9159010 Learn more
EM4100 RFID Card, 125kHz Order No.: 9134165E Learn more
Mifare Classic 1K RFID Card, 13.56MHz Order No.: 9134173 Learn more
EM4100 RFID Key Fob, 125kHz Order No.: 9134166E Learn more
Mifare Classic 1K RFID Key Fob, 13.56MHz Order No.: 9134174 Learn more
External RFID Card Reader 125kHz (USB) Order No.: 9137420E Learn more
External RFID Card Reader 125kHz + 13.56MHz with NFC (USB) Order No.: 9137421E Learn more
External Secured RFID Card Reader 125kHz + 13.56MHz with NFC (USB) Order No.: 9137424E Learn more
AXIS Lift Relay Order No.: 9150501 Learn more

Strikes

Electrical Strike 11211 Order No.: 932071E Learn more
Electrical Strike 11221 Hold-Open Order No.: 932081E Learn more
Electrical Strike 11211MB Mechanical Blocking Order No.: 932091E Learn more
Regular Strike with Contact Order No.: 932061E Learn more
Failsafe Strike with Contact Order No.: 932062E Learn more
Simple Failsafe Strike Order No.: 932072E Learn more

Power Supply

PoE Injector Order No.: 91378100 Learn more
12V Power Supply EU Plug Order No.: 91341481E Learn more
SW Applications
Sales Area

Selling Propositions

  • Transition to smart and secured cards
    Ensure a step-by-step transition from obsolete, easy-to-copy 125kHz technology to a smart, secure 13.56MHz technology without the need for a high one-time investment.
  • Smart automatic calibration
    With regular automatic calibration, the unit reliably registers and evaluates each touch and prevents detection of unwanted or false touches (e.g. raindrops).
  • Two-factor authentication
    For an extra level of security, two-factor authentication can be set requiring users to confirm their identity by combining the RFID badge with a PIN code.
  • Remote configuration and management
    The 2N Access Unit 2.0 can be remotely configured via 2N® Remote Configuration cloud service or administrator can use 2N® Access Commander for bulk management.
  • Easily installed edge device
    A single ethernet cable, Power over Ethernet, and the option to connect a door strike, exit button, or door contact directly to the unit make installation very simple.
  • Silent alarm
    A unique code can be set on the unit that opens the door, but also triggers another action without warning the intruder, such as setting off an alarm at the building security control centre.
  • Guaranteed visibility even at night
    Thanks to backlighting with adjustable brightness, visibility of the keypad is ensured even at night or in places with minimal lighting.
  • Notification of incorrect PIN entry
    If anybody repeatedly enters an incorrect PIN to get into the building, the 2N Access Unit immediately notifies the administrator and blocks the keypad.
  • Time & attendance terminal
    The 2N Access Unit 2.0 works as a T&A terminal recording all your employees’ arrivals and departures. These information are sent to 2N® Access Commander where can be seen in graphical form.
  • NFC support
    Thanks to wireless NFC technology, you can also easily open the door using a smartphone with Android OS and the 2N® Mobile Key application installed.
Show more

Where to Sell

Take a look at the solutions where this product can be used.
Residential - Single House
Residential - Apartment Building
Commercial & Corporate Sector

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
RFID card reader
Supported frequencies: 125kHz and 13.56MHz
125kHz: EM4100, EM4102, HID Prox
13.56MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Documents

Marketing documentation
Request information