2N® Access Unit 2.0 RFID
The 2N® Access Unit 2.0 RFID access control unit has a multi-frequency RFID card reader that allows the simultaneous use of older 125kHz cards and new, secure 13.56MHz smart cards. Its greatest benefits are simple installation using a single ethernet cable, remote administration and hardware and software security.
- Multi-frequency RFID card reader
- Minimum wiring requirements
- Same design as IP intercoms
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
Multi-frequency RFID card readerThe combined RFID reader is extremely useful in shared office buildings where some people use secure 13.56MHz smart cards and others use regular 125kHz cards.
-
Minimum wiring requirementsA single ethernet cable is all you need to ensure communication with the unit and power (PoE). You can also connect a door lock, exit button, door contact or motion sensor just as easily directly to the unit.
-
Same design as IP intercomsThe access control unit will impress you with its elegant appearance, which has the same design as 2N IP intercoms. The unit comes in nickel or black and can be installed on the wall or flush mounted.
-
Remote configuration and administrationThanks to IP technology, the access control unit can be administered remotely via a web interface You can also use 2N® Access Commander software or the 2N® Remote Configuration service to administer the unit.
-
Attendance terminalThe 2N® Access Unit 2.0 operates as a basic access terminal recording the arrival and departure of employees. Information on attendance is subsequently displayed in the 2N® Access Commander software.
-
Protection against hackersWith IK08 class protection, the access control unit is resistant to vandals and software hackers. It can resist dictionary attacks and supports the 802.1x protocol for authentication in the network.
-
Double-sided door securityAdd-on modules can be connected to the 2N Access Unit 2.0, e.g. an RFID exit reader or keypad, as well as a simple exit button to ensure the door is secured from both sides.
-
NFC supportThanks to support of NFC technology, as well as RFID cards, users can use their Android smartphone with the installed 2N® Mobile Key application to enter the building.
Show more
Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12V/1A DC |
| PoE: | 802.3af (Class 0–12.95W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12V DC/max 600mA |
| Passive switch: | NO/NC contacts, up to 30V/1A AC/DC |
| Inputs: | 2 inputs - in passive/active mode (-30V to +30V DC) |
| OFF = open or Uin> 1.5V | |
| ON = short-circuit or Uin< 1.5V | |
| Tamper switch: | native part of the 2N Access Unit 2.0 |
| Audio: | buzzer (97dBA) and microphone |
| Supported protocols: | DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog |
| RFID card reader | |
| Supported frequencies: | 125kHz and 13.56MHz |
| 125kHz: | EM4100, EM4102, HID Prox |
| 13.56MHz: | ISO14443A, ISO14443B, NFC support |
| reads UID (CSN) | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Mechanical properties | |
| Frame: | robust zinc cast frame with surface finish (nickel and black colour) |
| Operating temperature: | -40°C to +60°C |
| Storage temperature: | -40°C to +70°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Dimensions: | Wall (surface) mounting frame: |
| - 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
| Flush mounting frame: | |
| - 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
| Flush mounting box (minimum hole): | |
| - 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
| Weight: | max 0.8kg |
| Cover rating: | IP54 and IK08 |
| Extension modules | |
| 2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc. | |
Show more
Typical Usage
2N Access Units 2.0 Introduction
Get to know the features, capabilities and unique benefits of multitechnology 2N IP access control readers.
Watch the video Technical area 
Case Study
Example of Typical Connection
FAQ
Are you still looking for more information? Check out the frequently asked questions and answers.
See more Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12V/1A DC |
| PoE: | 802.3af (Class 0–12.95W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12V DC/max 600mA |
| Passive switch: | NO/NC contacts, up to 30V/1A AC/DC |
| Inputs: | 2 inputs - in passive/active mode (-30V to +30V DC) |
| OFF = open or Uin> 1.5V | |
| ON = short-circuit or Uin< 1.5V | |
| Tamper switch: | native part of the 2N Access Unit 2.0 |
| Audio: | buzzer (97dBA) and microphone |
| Supported protocols: | DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog |
| RFID card reader | |
| Supported frequencies: | 125kHz and 13.56MHz |
| 125kHz: | EM4100, EM4102, HID Prox |
| 13.56MHz: | ISO14443A, ISO14443B, NFC support |
| reads UID (CSN) | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Mechanical properties | |
| Frame: | robust zinc cast frame with surface finish (nickel and black colour) |
| Operating temperature: | -40°C to +60°C |
| Storage temperature: | -40°C to +70°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Dimensions: | Wall (surface) mounting frame: |
| - 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
| Flush mounting frame: | |
| - 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
| Flush mounting box (minimum hole): | |
| - 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
| Weight: | max 0.8kg |
| Cover rating: | IP54 and IK08 |
| Extension modules | |
| 2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc. | |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area
Request information Selling Propositions
- Multi-frequency RFID card readerThe combined RFID reader is extremely useful in shared office buildings where some people use secure 13.56MHz smart cards and others use regular 125kHz cards.
- Minimum wiring requirementsA single ethernet cable is all you need to ensure communication with the unit and power (PoE). You can also connect a door lock, exit button, door contact or motion sensor just as easily directly to the unit.
- Same design as IP intercomsThe access control unit will impress you with its elegant appearance, which has the same design as 2N IP intercoms. The unit comes in nickel or black and can be installed on the wall or flush mounted.
- Remote configuration and administrationThanks to IP technology, the access control unit can be administered remotely via a web interface You can also use 2N® Access Commander software or the 2N® Remote Configuration service to administer the unit.
- Attendance terminalThe 2N® Access Unit 2.0 operates as a basic access terminal recording the arrival and departure of employees. Information on attendance is subsequently displayed in the 2N® Access Commander software.
- Protection against hackersWith IK08 class protection, the access control unit is resistant to vandals and software hackers. It can resist dictionary attacks and supports the 802.1x protocol for authentication in the network.
- Double-sided door securityAdd-on modules can be connected to the 2N Access Unit 2.0, e.g. an RFID exit reader or keypad, as well as a simple exit button to ensure the door is secured from both sides.
- NFC supportThanks to support of NFC technology, as well as RFID cards, users can use their Android smartphone with the installed 2N® Mobile Key application to enter the building.
Show more
Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12V/1A DC |
| PoE: | 802.3af (Class 0–12.95W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12V DC/max 600mA |
| Passive switch: | NO/NC contacts, up to 30V/1A AC/DC |
| Inputs: | 2 inputs - in passive/active mode (-30V to +30V DC) |
| OFF = open or Uin> 1.5V | |
| ON = short-circuit or Uin< 1.5V | |
| Tamper switch: | native part of the 2N Access Unit 2.0 |
| Audio: | buzzer (97dBA) and microphone |
| Supported protocols: | DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog |
| RFID card reader | |
| Supported frequencies: | 125kHz and 13.56MHz |
| 125kHz: | EM4100, EM4102, HID Prox |
| 13.56MHz: | ISO14443A, ISO14443B, NFC support |
| reads UID (CSN) | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Mechanical properties | |
| Frame: | robust zinc cast frame with surface finish (nickel and black colour) |
| Operating temperature: | -40°C to +60°C |
| Storage temperature: | -40°C to +70°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Dimensions: | Wall (surface) mounting frame: |
| - 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
| Flush mounting frame: | |
| - 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
| Flush mounting box (minimum hole): | |
| - 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
| Weight: | max 0.8kg |
| Cover rating: | IP54 and IK08 |
| Extension modules | |
| 2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc. | |
Show more
