Skip to Content
2N

2N® LiftGate

The 2N® LiftGate IoT gateway will transform a regular elevator into a modern IP solution for the 21st century. Plus, you needn’t worry if there’s a UTP cable in the elevator. IP connectivity in the elevator is secured using 2 wires in the travelling cable. 2N® LiftGate combines the functions of an LTE router, a backup power supply, a converter (2-wire to IP) and a switch all in one unit. Install just 1 product instead of 4 and save time and money.

  • IP connectivity over 2-wire
  • Backup power supply
  • All in one IoT device
About

Features & Benefits

  • IP connectivity over 2-wire
    Install the 2N® LiftGate in the lift machine room, a 2N® LiftGate Cabin Switch on the roof of the cabin and connect them via 2 wires in the travelling cable.
  • Backup power supply
    Ensure emergency communication in the lift even during power cuts. The 2N® LiftGate solution includes UPS to power critical communication equipment and emergency lighting.
  • All in one IoT device
    You no longer need a separate LTE router, switch, converter and backup power supply. 2N® LiftGate will perform all these functions for you. One certified product that saves you time and money.
  • Communication via SIM and WAN port
    You only need one SIM card to make calls, for data communication with the gateway, the controller or access control system. A backup option can be provided in the form of a WAN port or second SIM.
  • Up to 4 IP devices in the cabin
    You can connect an IP communicator, a camera, a display for ads or a reader to the 2N® LiftGate Cabin Switch. There’s even a backup 12 V output for emergency lighting.
  • Relay outputs and inputs
    Has the mobile network gone down? The 2N® LiftGate switches a relay, informs the controller, which changes the status of the lift to out of service. However, relay outputs and inputs offer many more scenarios.
  • Connecting the machine room and the cabin
    Connect a lift controller and IP telephone to 2N® LiftGate in the machine room. This meets the requirements of technical standards for shafts of more than 30 m and ensures communication between the machine room and the cabin.
  • Management via cloud and SMS
    Connect the IoT gateway to the 2N® Elevator Center in cloud to manage and monitor it remotely. Naturally, you can control the gateway and get notifications via SMS.
Show more

Technical Specification

2N® LiftGate – Main unit
Telephone network
GSM band: EU (EGSM 900 MHz, GSM 1800 MHz)
AU (EGSM 850/900 MHz, GSM 1800/1900 MHz)
UMTS band: EU (850/900/2100 MHz)
US (850/1700/1900 MHz)
AU (850/900/1900/2100 MHz)
LTE band: EU (B1, B3, B5, B7, B8, B20)
US (B2, B4, B5, B12, B13, B14, B66, B71)
AU (B1, B3, B5, B7, B28, B40)
SIM cards: 2 slots; (U)SIM, 1.8 / 3.0 V

 

 
Antenna
Number: Two inputs (Main an Diversity)
Impedance: 50 Ω
Connector type: F-SMA

 

 
Ethernet
Interface: 4x RJ-45, 1 Gbps (1x WAN, 3x LAN)
PoE: 1x PoE 802.3af Class 2 (max 6.49 W) via the LAN1 port
Protocols: IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG

 

 
Inputs and outputs
Inputs: 2
0 - 24 V (low level 0-2 V, high 4-24 V)
Outputs: 2x relay (NO, NC, COM terminal block)
max. 30 V / 1 A DC, 125 V / 0.3 A AC
Number of lines: 2

Power supply
Voltage:
100 – 230 V AC
Frequency: 50/60 Hz
Input power: 65 W
(for 2x Cabin Switch)
Backup power supply: built-in lead-acid battery, 12 V / 9 Ah (included)

 

 
Mechanical properties
Operating temperature: -20°C to +50°C
Dimensions: 270 x 240 x 80 mm
IP protection: IP20
Weight: 4.7 kg with battery, 2.2 kg without battery
2N® LiftGate – Cabin Switch
Connection to the main unit: 2 wires

 

 
Interface
Ethernet: 4x RJ-45 port, 100 Mbps
PoE: 2x PoE 802.3af Class 0 (max 12.95 W) via LAN1 port
Output: 12 V DC, 100 mA (for emergency lighting)
Protocols: IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG

 

 
Mechanical properties
Operating temperature: -20°C to +50°C
Dimensions: 143 x 95 x 32 mm
IP protection: IP30
Installation: Surface mounted on a wall or DIN rail
Weight: 0.2 kg
Show more
Typical Usage

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentations

Case Study

Example of Typical Connection

Technical Specification

2N® LiftGate – Main unit
Telephone network
GSM band: EU (EGSM 900 MHz, GSM 1800 MHz)
AU (EGSM 850/900 MHz, GSM 1800/1900 MHz)
UMTS band: EU (850/900/2100 MHz)
US (850/1700/1900 MHz)
AU (850/900/1900/2100 MHz)
LTE band: EU (B1, B3, B5, B7, B8, B20)
US (B2, B4, B5, B12, B13, B14, B66, B71)
AU (B1, B3, B5, B7, B28, B40)
SIM cards: 2 slots; (U)SIM, 1.8 / 3.0 V

 

 
Antenna
Number: Two inputs (Main an Diversity)
Impedance: 50 Ω
Connector type: F-SMA

 

 
Ethernet
Interface: 4x RJ-45, 1 Gbps (1x WAN, 3x LAN)
PoE: 1x PoE 802.3af Class 2 (max 6.49 W) via the LAN1 port
Protocols: IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG

 

 
Inputs and outputs
Inputs: 2
0 - 24 V (low level 0-2 V, high 4-24 V)
Outputs: 2x relay (NO, NC, COM terminal block)
max. 30 V / 1 A DC, 125 V / 0.3 A AC
Number of lines: 2

Power supply
Voltage:
100 – 230 V AC
Frequency: 50/60 Hz
Input power: 65 W
(for 2x Cabin Switch)
Backup power supply: built-in lead-acid battery, 12 V / 9 Ah (included)

 

 
Mechanical properties
Operating temperature: -20°C to +50°C
Dimensions: 270 x 240 x 80 mm
IP protection: IP20
Weight: 4.7 kg with battery, 2.2 kg without battery
2N® LiftGate – Cabin Switch
Connection to the main unit: 2 wires

 

 
Interface
Ethernet: 4x RJ-45 port, 100 Mbps
PoE: 2x PoE 802.3af Class 0 (max 12.95 W) via LAN1 port
Output: 12 V DC, 100 mA (for emergency lighting)
Protocols: IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG

 

 
Mechanical properties
Operating temperature: -20°C to +50°C
Dimensions: 143 x 95 x 32 mm
IP protection: IP30
Installation: Surface mounted on a wall or DIN rail
Weight: 0.2 kg
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Telephones

2N® IP Phone D7A Order No.: 1120102 Learn more
IP Telephone Grandstream GXV3350 Order No.: 1120111EU Learn more

Other Accessories

External antenna with SMA connector Order No.: 22041572 Learn more
Sales Area

Selling Propositions

  • IP connectivity over 2-wire
    Install the 2N® LiftGate in the lift machine room, a 2N® LiftGate Cabin Switch on the roof of the cabin and connect them via 2 wires in the travelling cable.
  • Backup power supply
    Ensure emergency communication in the lift even during power cuts. The 2N® LiftGate solution includes UPS to power critical communication equipment and emergency lighting.
  • All in one IoT device
    You no longer need a separate LTE router, switch, converter and backup power supply. 2N® LiftGate will perform all these functions for you. One certified product that saves you time and money.
  • Communication via SIM and WAN port
    You only need one SIM card to make calls, for data communication with the gateway, the controller or access control system. A backup option can be provided in the form of a WAN port or second SIM.
  • Up to 4 IP devices in the cabin
    You can connect an IP communicator, a camera, a display for ads or a reader to the 2N® LiftGate Cabin Switch. There’s even a backup 12 V output for emergency lighting.
  • Relay outputs and inputs
    Has the mobile network gone down? The 2N® LiftGate switches a relay, informs the controller, which changes the status of the lift to out of service. However, relay outputs and inputs offer many more scenarios.
  • Connecting the machine room and the cabin
    Connect a lift controller and IP telephone to 2N® LiftGate in the machine room. This meets the requirements of technical standards for shafts of more than 30 m and ensures communication between the machine room and the cabin.
  • Management via cloud and SMS
    Connect the IoT gateway to the 2N® Elevator Center in cloud to manage and monitor it remotely. Naturally, you can control the gateway and get notifications via SMS.
Show more

Certifications and Resistance

The quality of our products is crucial to us and our customers, which is why we subjected them to the toughest resistance tests.

Where to Sell

Take a look at the solutions where this product can be used.
Residential - Single House
Residential - Apartment Building
Commercial & Corporate Sector

Technical Specification

2N® LiftGate – Main unit
Telephone network
GSM band: EU (EGSM 900 MHz, GSM 1800 MHz)
AU (EGSM 850/900 MHz, GSM 1800/1900 MHz)
UMTS band: EU (850/900/2100 MHz)
US (850/1700/1900 MHz)
AU (850/900/1900/2100 MHz)
LTE band: EU (B1, B3, B5, B7, B8, B20)
US (B2, B4, B5, B12, B13, B14, B66, B71)
AU (B1, B3, B5, B7, B28, B40)
SIM cards: 2 slots; (U)SIM, 1.8 / 3.0 V

 

 
Antenna
Number: Two inputs (Main an Diversity)
Impedance: 50 Ω
Connector type: F-SMA

 

 
Ethernet
Interface: 4x RJ-45, 1 Gbps (1x WAN, 3x LAN)
PoE: 1x PoE 802.3af Class 2 (max 6.49 W) via the LAN1 port
Protocols: IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG

 

 
Inputs and outputs
Inputs: 2
0 - 24 V (low level 0-2 V, high 4-24 V)
Outputs: 2x relay (NO, NC, COM terminal block)
max. 30 V / 1 A DC, 125 V / 0.3 A AC
Number of lines: 2

Power supply
Voltage:
100 – 230 V AC
Frequency: 50/60 Hz
Input power: 65 W
(for 2x Cabin Switch)
Backup power supply: built-in lead-acid battery, 12 V / 9 Ah (included)

 

 
Mechanical properties
Operating temperature: -20°C to +50°C
Dimensions: 270 x 240 x 80 mm
IP protection: IP20
Weight: 4.7 kg with battery, 2.2 kg without battery
2N® LiftGate – Cabin Switch
Connection to the main unit: 2 wires

 

 
Interface
Ethernet: 4x RJ-45 port, 100 Mbps
PoE: 2x PoE 802.3af Class 0 (max 12.95 W) via LAN1 port
Output: 12 V DC, 100 mA (for emergency lighting)
Protocols: IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG

 

 
Mechanical properties
Operating temperature: -20°C to +50°C
Dimensions: 143 x 95 x 32 mm
IP protection: IP30
Installation: Surface mounted on a wall or DIN rail
Weight: 0.2 kg
Show more

Documents

Marketing documentations
Request information