Skip to Content
2N

2N® 2Wire for Lifts

The 2N® 2Wire for lifts is a practical set of two convertors that allows you to connect any two IP devices even in places with no Ethernet. Its invaluable advantage is that you don’t need to add new cables to the lift. Thanks to the 2N® 2Wire set, you simply connect the required IP device in the cabin to the existing travelling cable and then to the IP network.

  • Communications and Power supply on two wires
  • Easy installation
  • Long range transfer
Request information Where to Buy
About

Features & Benefits

  • Communication and Power supply on two wires
    Connect any IP device even in places where there is no available IP infrastructure and have only two-wire line available.
  • Easy installation
    Simply connect the communication interface and power supply, and the device is ready for use.
  • Long range transfer
    Powering the IP-connected devices via PoE is possible up to a distance of 220m, twice as much as allowed by standard Ethernet cable length.
  • Universal Ethernet ‘extension’
    The 2N® 2Wire brings Ethernet connectivity to areas without Ethernet infrastructure. A typical example is an elevator cabin where you need to connect an IP device, e.g. 2N IP intercoms, or lift communicators.
  • Robust aluminium housing
    Thanks to its aluminium housing the 2N® 2Wire converter is extremely durable and meets the requirements of in-lift operation.
  • Utilize existing cabling
    With the 2N® 2Wire you can use the existing wiring and don’t have to lay new cables or make other modifications.
  • Reliability
    Significantly more reliable than alternatives such as WiFi connection, especially for critical applications such as alarm communicators, which have to be constantly available.
  • Power supply and connectors
    The pack includes an adapter with a US/UK/EU plug of your choice. Screw-on connectors prevent cables from falling out and increase reliability.
  • Power supply
    Included is an adapter with a selectable US/UK/EU plug.
Show more

Technical Specification

Ethernet Interface
Connector type: RJ45
Speed: 10/100 Base T, half-duplex / full-duplex, auto-negotiation
IEEE 802.3af/at 40W, PoE+ compatible
Installation requirements
Cable type: 2-wire, Cat 5e, Cat 6 or similar
Impedance: 25Ω to 100Ω
Transfer range: max. 220m with Cat 6
Number: max. of 4 sets of convertor units per non-configurable switch
Transfer method
Access method: CSMA/CA and TDMA
Modulation method: Windowed OFDM
Frequency band: 1.8MHz to 30MHz
LED indicator lights
Power supply: Blue – power on
BNC: Green – connection on
PoE: Green – connection on
Electrical power supply
AC input: 100~240V AC, 50~60Hz
DC output: 48V DC / 0.84A~1.3A
Mechanical properties
Dimensions: 40 x 40 x 75mm (h x w x d)
Weight: 120g
Material: extruded aluminium
Operating temperature: -10°C – 50°C
Storage temperature: -30°C – 70°C
Show more

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentation
Software & firmware

Case Study

Example of Typical Connection

Technical Specification

Ethernet Interface
Connector type: RJ45
Speed: 10/100 Base T, half-duplex / full-duplex, auto-negotiation
IEEE 802.3af/at 40W, PoE+ compatible
Installation requirements
Cable type: 2-wire, Cat 5e, Cat 6 or similar
Impedance: 25Ω to 100Ω
Transfer range: max. 220m with Cat 6
Number: max. of 4 sets of convertor units per non-configurable switch
Transfer method
Access method: CSMA/CA and TDMA
Modulation method: Windowed OFDM
Frequency band: 1.8MHz to 30MHz
LED indicator lights
Power supply: Blue – power on
BNC: Green – connection on
PoE: Green – connection on
Electrical power supply
AC input: 100~240V AC, 50~60Hz
DC output: 48V DC / 0.84A~1.3A
Mechanical properties
Dimensions: 40 x 40 x 75mm (h x w x d)
Weight: 120g
Material: extruded aluminium
Operating temperature: -10°C – 50°C
Storage temperature: -30°C – 70°C
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories
SW Applications
Sales Area

Selling Propositions

  • Communication and Power supply on two wires
    Connect any IP device even in places where there is no available IP infrastructure and have only two-wire line available.
  • Easy installation
    Simply connect the communication interface and power supply, and the device is ready for use.
  • Long range transfer
    Powering the IP-connected devices via PoE is possible up to a distance of 220m, twice as much as allowed by standard Ethernet cable length.
  • Universal Ethernet ‘extension’
    The 2N® 2Wire brings Ethernet connectivity to areas without Ethernet infrastructure. A typical example is an elevator cabin where you need to connect an IP device, e.g. 2N IP intercoms, or lift communicators.
  • Robust aluminium housing
    Thanks to its aluminium housing the 2N® 2Wire converter is extremely durable and meets the requirements of in-lift operation.
  • Utilize existing cabling
    With the 2N® 2Wire you can use the existing wiring and don’t have to lay new cables or make other modifications.
  • Reliability
    Significantly more reliable than alternatives such as WiFi connection, especially for critical applications such as alarm communicators, which have to be constantly available.
  • Power supply and connectors
    The pack includes an adapter with a US/UK/EU plug of your choice. Screw-on connectors prevent cables from falling out and increase reliability.
  • Power supply
    Included is an adapter with a selectable US/UK/EU plug.
Show more

Technical Specification

Ethernet Interface
Connector type: RJ45
Speed: 10/100 Base T, half-duplex / full-duplex, auto-negotiation
IEEE 802.3af/at 40W, PoE+ compatible
Installation requirements
Cable type: 2-wire, Cat 5e, Cat 6 or similar
Impedance: 25Ω to 100Ω
Transfer range: max. 220m with Cat 6
Number: max. of 4 sets of convertor units per non-configurable switch
Transfer method
Access method: CSMA/CA and TDMA
Modulation method: Windowed OFDM
Frequency band: 1.8MHz to 30MHz
LED indicator lights
Power supply: Blue – power on
BNC: Green – connection on
PoE: Green – connection on
Electrical power supply
AC input: 100~240V AC, 50~60Hz
DC output: 48V DC / 0.84A~1.3A
Mechanical properties
Dimensions: 40 x 40 x 75mm (h x w x d)
Weight: 120g
Material: extruded aluminium
Operating temperature: -10°C – 50°C
Storage temperature: -30°C – 70°C
Show more

Documents

Marketing documentation
Software & firmware
Request information