Skip to Content
2N

2N® EasyGate IP

The end of 2G and 3G networks is approaching. Transition seamlessly to modern 4G with the 2N® EasyGate IP. Connect an analogue elevator communicator to the gateway. This will ensure voice or data (VoIP) communication via a mobile network with an operations centre. If you are using an old mobile network for emergency communication, you can continue to do so. When you’re ready to transition to 4G, all you’ll need is a single click in settings. The gateway also supports VoIP (SIP) technology, which is the only technology to guarantee reliable transmission of a DTMF signal.

  • 2G, 3G and 4G support
  • Reliable transmission of DTMF
  • VoIP is the future
About

Features & Benefits

  • 2G, 3G and 4G support
    The gateway supports 2G, 3G and 4G networks with and mainly VoIP. Install the gateway already now and continue using the old network. When the time comes, you can switch to 4G.
  • Reliable transmission of DTMF
    2G, 3G and VoLTE frequently distort the DTMF signal. Only VoIP technology using a SIP protocol guarantees reliable transmission of DTMF, which is essential for identification of the lift.
  • VoIP is the future
    Change all your analogue devices for devices that support VoIP. Without a single change to the hardware in the cabin. You save on costs and the call will be crystal clear.
  • For use in any lift shaft
    A sturdy cover, operating temperature of up to 85 °C, and IP43 protection against sprayed water. All this guarantees that the gateway can easily withstand adverse conditions in any lift shaft.
  • Backup operation using battery power
    The 2N® EasyGate IP works if there is a power cut. The backup battery can keep the gateway working. Users in the lift can always call for help and you will be in compliance with the legal standards.
  • Configuration in 2 minutes
    Any technician can easily set up the gateway, even without special expertise. Configuration is automated and takes no more than two minutes.
  • Remote administration and monitoring
    With our forthcoming 2N® Elevator Center cloud service, you’ll save on costs for call-outs for technicians. Look forward to the securest cloud solution on the lift communication market.
  • Variant with a modem
    Some lift devices communicated via the PSTN network by modem. We have a version of the 2N® EasyGate IP gateway for installations like that too.
Show more

Technical Specification

Cellular network
4G LTE bands: EU (EC21-E): B1/B3/B5/B7/B8/B20
AU (EC21-AU): B2/B4/B5/B7/B8/B28/B40
UMTS/WCDMA bands: EU (EC21-E): 850/900/2100 MHz
AU (EC21-AU): 850/900/1900/2100 MHz
GSM bands: EU (EC21-E): EGSM 900 MHz, GSM 1800 MHz
AU (EC21-AU): EGSM 850/900 MHz, GSM 1800/1900 MHz
SIM cards: 2 slots, both support 3 V and 1.8 V SIM cards
VoIP
Protocols: SIP (RFC3261) over UDP, SIPs, SRTP
DTMF: a) In-band
Analogy of traditional DTMF, where tones are merged with speech into single voice channel.
b) SIP INFO (RFC 2976)
DTMF signals are sent separately in the SIP message body
Antenna
Connector type: SMA
Impedance: 50 Ohms
Line interface
Interface type: FXS with screw terminal blocks
Power source
Power adapter: (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source
Backup power: 4×AA batteries, constantly monitored
Configuration and upgrade
Local: web UI over USB
Cloud: 2N® Elevator Center
Other
Dimensions: 195 × 119 × 61 mm
Weight: 600 g
Humidity: max 90%, non condensing
IP coverage: IP43
Operating temperature: -40°C to +85°C
Status LEDs: power, cellular network, FXS line, data, signal strength
Certifications: EN 62368-1, EN 81-28, EN 301489-1, EN 301489-7, EN 301511, EN 301908-1, EN 301908-2, EN 301908-13, EN 62311, EN 63000, EN 12016
FCC Part 15b, UL 62368-1, PTCRB
ICES-003 Issue 6, CSA C22.2 No.62368-1
AS/CA S003.1, S003.3, S042.1, S042.4, AS/NZS 62368.1 App ZZ
Show more
Typical Usage

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentations

Case Study

Example of Typical Connection

Technical Specification

Cellular network
4G LTE bands: EU (EC21-E): B1/B3/B5/B7/B8/B20
AU (EC21-AU): B2/B4/B5/B7/B8/B28/B40
UMTS/WCDMA bands: EU (EC21-E): 850/900/2100 MHz
AU (EC21-AU): 850/900/1900/2100 MHz
GSM bands: EU (EC21-E): EGSM 900 MHz, GSM 1800 MHz
AU (EC21-AU): EGSM 850/900 MHz, GSM 1800/1900 MHz
SIM cards: 2 slots, both support 3 V and 1.8 V SIM cards
VoIP
Protocols: SIP (RFC3261) over UDP, SIPs, SRTP
DTMF: a) In-band
Analogy of traditional DTMF, where tones are merged with speech into single voice channel.
b) SIP INFO (RFC 2976)
DTMF signals are sent separately in the SIP message body
Antenna
Connector type: SMA
Impedance: 50 Ohms
Line interface
Interface type: FXS with screw terminal blocks
Power source
Power adapter: (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source
Backup power: 4×AA batteries, constantly monitored
Configuration and upgrade
Local: web UI over USB
Cloud: 2N® Elevator Center
Other
Dimensions: 195 × 119 × 61 mm
Weight: 600 g
Humidity: max 90%, non condensing
IP coverage: IP43
Operating temperature: -40°C to +85°C
Status LEDs: power, cellular network, FXS line, data, signal strength
Certifications: EN 62368-1, EN 81-28, EN 301489-1, EN 301489-7, EN 301511, EN 301908-1, EN 301908-2, EN 301908-13, EN 62311, EN 63000, EN 12016
FCC Part 15b, UL 62368-1, PTCRB
ICES-003 Issue 6, CSA C22.2 No.62368-1
AS/CA S003.1, S003.3, S042.1, S042.4, AS/NZS 62368.1 App ZZ
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Other Accessories

RJ11 to FXS adapter Order No.: 5029001 Learn more
Sales Area

Selling Propositions

  • 2G, 3G and 4G support
    The gateway supports 2G, 3G and 4G networks with and mainly VoIP. Install the gateway already now and continue using the old network. When the time comes, you can switch to 4G.
  • Reliable transmission of DTMF
    2G, 3G and VoLTE frequently distort the DTMF signal. Only VoIP technology using a SIP protocol guarantees reliable transmission of DTMF, which is essential for identification of the lift.
  • VoIP is the future
    Change all your analogue devices for devices that support VoIP. Without a single change to the hardware in the cabin. You save on costs and the call will be crystal clear.
  • For use in any lift shaft
    A sturdy cover, operating temperature of up to 85 °C, and IP43 protection against sprayed water. All this guarantees that the gateway can easily withstand adverse conditions in any lift shaft.
  • Backup operation using battery power
    The 2N® EasyGate IP works if there is a power cut. The backup battery can keep the gateway working. Users in the lift can always call for help and you will be in compliance with the legal standards.
  • Configuration in 2 minutes
    Any technician can easily set up the gateway, even without special expertise. Configuration is automated and takes no more than two minutes.
  • Remote administration and monitoring
    With our forthcoming 2N® Elevator Center cloud service, you’ll save on costs for call-outs for technicians. Look forward to the securest cloud solution on the lift communication market.
  • Variant with a modem
    Some lift devices communicated via the PSTN network by modem. We have a version of the 2N® EasyGate IP gateway for installations like that too.
Show more

Where to Sell

Take a look at the solutions where this product can be used.
Residential - Single House
Residential - Apartment Building
Commercial & Corporate Sector

Technical Specification

Cellular network
4G LTE bands: EU (EC21-E): B1/B3/B5/B7/B8/B20
AU (EC21-AU): B2/B4/B5/B7/B8/B28/B40
UMTS/WCDMA bands: EU (EC21-E): 850/900/2100 MHz
AU (EC21-AU): 850/900/1900/2100 MHz
GSM bands: EU (EC21-E): EGSM 900 MHz, GSM 1800 MHz
AU (EC21-AU): EGSM 850/900 MHz, GSM 1800/1900 MHz
SIM cards: 2 slots, both support 3 V and 1.8 V SIM cards
VoIP
Protocols: SIP (RFC3261) over UDP, SIPs, SRTP
DTMF: a) In-band
Analogy of traditional DTMF, where tones are merged with speech into single voice channel.
b) SIP INFO (RFC 2976)
DTMF signals are sent separately in the SIP message body
Antenna
Connector type: SMA
Impedance: 50 Ohms
Line interface
Interface type: FXS with screw terminal blocks
Power source
Power adapter: (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source
Backup power: 4×AA batteries, constantly monitored
Configuration and upgrade
Local: web UI over USB
Cloud: 2N® Elevator Center
Other
Dimensions: 195 × 119 × 61 mm
Weight: 600 g
Humidity: max 90%, non condensing
IP coverage: IP43
Operating temperature: -40°C to +85°C
Status LEDs: power, cellular network, FXS line, data, signal strength
Certifications: EN 62368-1, EN 81-28, EN 301489-1, EN 301489-7, EN 301511, EN 301908-1, EN 301908-2, EN 301908-13, EN 62311, EN 63000, EN 12016
FCC Part 15b, UL 62368-1, PTCRB
ICES-003 Issue 6, CSA C22.2 No.62368-1
AS/CA S003.1, S003.3, S042.1, S042.4, AS/NZS 62368.1 App ZZ
Show more

Documents

Marketing documentations
Request information