Skip to Content
2N

2N® LiftIP 2.0

The 2N® LiftIP 2.0 is a unique IP-based lift emergency communicator that uses VoIP technology to transmit calls from a lift cabin to the call centre or control room. The IP technology allows you to have the communicator under constant monitoring as well as letting you manage it remotely and power it via PoE. The option of automatic configuration in the form of predefined configuration templates makes 2N® LiftIP 2.0 a truly plug-and-play solution.

  • 24/7 monitoring of availability
  • Remote management & configuration
  • Alarm calls tied to video
  • Data protection & network security
О продукте

Features & Benefits

  • 24/7 MONITORING OF AVAILABILITY
    Connect the 2N® LiftIP 2.0 to the 2N® Elevator Center and keep it under control 24/7. Once the communicator malfunctions, you will be notified immediately via email or operational call.
  • REMOTE MANAGEMENT & CONFIGURATION
    It's easier and faster than ever to change a configuration template, set up or update this IP-based communicator. Connect it to the 2N® Elevator Center and do all this remotely.
  • ALARM CALLS TIED TO VIDEO
    If elevator passengers get trapped, the audio call from the 2N® LiftIP 2.0 dialler can be linked to the video feed from an IP camera in the lift. The dispatcher thus has an immediate overview of a situation in the lift cabin.
  • DATA PROTECTION & NETWORK SECURITY
    2N® LiftIP 2.0 meets the very highest security criteria for personal data protection, product security and network infrastructure security.
  • FUTURE-PROOF COMMUNICATOR
    2N® LiftIP 2.0 is a smart lift communicator that uses existing IP infrastructure for SIP-based communication. The IP technology enables connection with other systems in the building.
  • HIGH-QUALITY AUDIO
    Forget about crackling during emergency calls. VoIP technology ensures instantly connected calls with full-duplex audio delivering crystal clear sound.
  • DIFFERENT VARIANTS
    Choose from three communicator variants depending on where you need to install it: on top of the cabin (TOC), hidden behind the panel or flush mount on the panel.
  • ONSITE OR REMOTE CALLING
    2N® LiftIP 2.0 can calls to either the reception on a LAN or to a remote call center using the 2N® LiftGate. This smart IoT router supports calls via the WAN port or its integrated 4G dual SIM gateway.
Показать больше

Technical Specification

Power Supply
Voltage: 10 – 30V DC (keep polarity) or 48V PoE 48V 802.3af
Consumption: Maximum 2W
ALARM and CANCEL voltage input
Inputs: 5-48V DC (keep polarity)
NC/NO contacts
Audio Parameters
Speaker: Integrated 16Ω / 1W (0.7 W output power), option to increase the output power to 2.3 W by connecting a speaker with 4 Ω impedance
Microphone: Integrated, option to connect an external electret microphone
Audio: Full duplex, G.711 (approx 90kbit/s)
Induction loop output: 3.35V RMS / 100 Ω output impedance
Codecs: PCMU, PCMA, G.711 (approx. 90 kbps), L16, G.722 and G.729
Connection of External Indicators
Voltage: 12 – 24V DC, external supply
Maximum current: 200mA (100 mA if a bulb is used)
Other parameters
Operating temperature: - 20 °C – +50°C
Dimensions (W x H x D):
PCB version hidden (behind the COP): 65 x 130 x 24 mm
COP design version (flush mount): 100 x 220 x 26 mm
115 x 190 x 26 mm
TOC long version (with Voice alarm station switch): 82 x 257 x 33 mm
TOC short version (w/o Voice alarm station switch): 82 x 186 x 33 mm
Показать больше
Typical Usage

Where to Buy

You can purchase these products from our authorised distributors.
Найти дистрибьютора
Для инженеров

Case Study

Example of Typical Connection

Technical Specification

Power Supply
Voltage: 10 – 30V DC (keep polarity) or 48V PoE 48V 802.3af
Consumption: Maximum 2W
ALARM and CANCEL voltage input
Inputs: 5-48V DC (keep polarity)
NC/NO contacts
Audio Parameters
Speaker: Integrated 16Ω / 1W (0.7 W output power), option to increase the output power to 2.3 W by connecting a speaker with 4 Ω impedance
Microphone: Integrated, option to connect an external electret microphone
Audio: Full duplex, G.711 (approx 90kbit/s)
Induction loop output: 3.35V RMS / 100 Ω output impedance
Codecs: PCMU, PCMA, G.711 (approx. 90 kbps), L16, G.722 and G.729
Connection of External Indicators
Voltage: 12 – 24V DC, external supply
Maximum current: 200mA (100 mA if a bulb is used)
Other parameters
Operating temperature: - 20 °C – +50°C
Dimensions (W x H x D):
PCB version hidden (behind the COP): 65 x 130 x 24 mm
COP design version (flush mount): 100 x 220 x 26 mm
115 x 190 x 26 mm
TOC long version (with Voice alarm station switch): 82 x 257 x 33 mm
TOC short version (w/o Voice alarm station switch): 82 x 186 x 33 mm
Показать больше

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
Показать больше
Аксессуары

Extending Modules

2N® 2Wire Номер заказа: 9159014EU Узнать больше
2N® Lift Induction Loop Amplifier, 2 аудиовхода Номер заказа: 919622E Узнать больше
2N® LiftIP 2.0 Relay extender Номер заказа: 921623E Узнать больше
2N® LiftIP 2.0 Voice Alarm Station Switch Номер заказа: 921661E Узнать больше
2N® Floor Announciator Номер заказа: 913305 Узнать больше

Audio Units

2N® LiftIP 2.0 Voice Alarm Station Set Номер заказа: 921661SET Узнать больше
Для дилеров

Selling Propositions

  • 24/7 MONITORING OF AVAILABILITY
    Connect the 2N® LiftIP 2.0 to the 2N® Elevator Center and keep it under control 24/7. Once the communicator malfunctions, you will be notified immediately via email or operational call.
  • REMOTE MANAGEMENT & CONFIGURATION
    It's easier and faster than ever to change a configuration template, set up or update this IP-based communicator. Connect it to the 2N® Elevator Center and do all this remotely.
  • ALARM CALLS TIED TO VIDEO
    If elevator passengers get trapped, the audio call from the 2N® LiftIP 2.0 dialler can be linked to the video feed from an IP camera in the lift. The dispatcher thus has an immediate overview of a situation in the lift cabin.
  • DATA PROTECTION & NETWORK SECURITY
    2N® LiftIP 2.0 meets the very highest security criteria for personal data protection, product security and network infrastructure security.
  • FUTURE-PROOF COMMUNICATOR
    2N® LiftIP 2.0 is a smart lift communicator that uses existing IP infrastructure for SIP-based communication. The IP technology enables connection with other systems in the building.
  • HIGH-QUALITY AUDIO
    Forget about crackling during emergency calls. VoIP technology ensures instantly connected calls with full-duplex audio delivering crystal clear sound.
  • DIFFERENT VARIANTS
    Choose from three communicator variants depending on where you need to install it: on top of the cabin (TOC), hidden behind the panel or flush mount on the panel.
  • ONSITE OR REMOTE CALLING
    2N® LiftIP 2.0 can calls to either the reception on a LAN or to a remote call center using the 2N® LiftGate. This smart IoT router supports calls via the WAN port or its integrated 4G dual SIM gateway.
Показать больше

Related norms and certificates

The quality of our products is crucial to us and our customers, which is why they fully comply with strict European Union standards.

Where to Sell

Take a look at the solutions where this product can be used.
Рынок домовладельцев - частный дом
Рынок домовладельцев - строительство квартир
Коммерческий и корпоративный сектор

Technical Specification

Power Supply
Voltage: 10 – 30V DC (keep polarity) or 48V PoE 48V 802.3af
Consumption: Maximum 2W
ALARM and CANCEL voltage input
Inputs: 5-48V DC (keep polarity)
NC/NO contacts
Audio Parameters
Speaker: Integrated 16Ω / 1W (0.7 W output power), option to increase the output power to 2.3 W by connecting a speaker with 4 Ω impedance
Microphone: Integrated, option to connect an external electret microphone
Audio: Full duplex, G.711 (approx 90kbit/s)
Induction loop output: 3.35V RMS / 100 Ω output impedance
Codecs: PCMU, PCMA, G.711 (approx. 90 kbps), L16, G.722 and G.729
Connection of External Indicators
Voltage: 12 – 24V DC, external supply
Maximum current: 200mA (100 mA if a bulb is used)
Other parameters
Operating temperature: - 20 °C – +50°C
Dimensions (W x H x D):
PCB version hidden (behind the COP): 65 x 130 x 24 mm
COP design version (flush mount): 100 x 220 x 26 mm
115 x 190 x 26 mm
TOC long version (with Voice alarm station switch): 82 x 257 x 33 mm
TOC short version (w/o Voice alarm station switch): 82 x 186 x 33 mm
Показать больше

Comparison Table of Lift Phones

Compare important functions of 2N lift phones with the help of this handy comparison table. Choose the right model of IP intercom for your specific need.
Compare
Запросить информацию