Skip to Content
2N

2N® 2Wire

2N® 2Wire is a set of two convertor units that lets you connect any IP device installed at locations with no IP infrastructure to your network. Connect the device, such as an IP intercom, to one unit and a switch to the other unit. Then connect both convertor units to each other using the existing analogue wiring. This will transmit audio and video as well as supply power.

  • Ethernet including PoE over 2 wires
  • Long reach
  • Up to four sets per installation
Request information Where to Buy
About

Features & Benefits

  • Ethernet including PoE over 2 wires
    Connect any IP device using a two-wire or coaxial cable, even in an analogue environment, or a site with limited IP infrastructure.
  • Long reach
    Powering the IP-connected devices via PoE is possible up to a distance of 220m, twice the maximum Ethernet specification cable length.
  • Up to four sets per installation
    You can connect up to four pairs of 2N® 2Wire convertor units to a single switch. This means you can connect an intercom to several indoor stations as well as an IP camera.
  • Easy installation
    No more configuring! At each end of the cable you just plug in one 2N® 2Wire unit and connect at least one of them to a power source.
  • Robust aluminium housing
    Thanks to its aluminium housing the 2N® 2Wire converter is rugged and resistant to mechanical damage.
  • Utilize existing cabling
    2N® 2Wire enables you to make use of existing wiring. You won’t have to lay new cables or do construction work.
  • Reliability
    The converter will not let you down. It is significantly more reliable, in comparison with alternatives, such as a WiFi connection.
  • Power supply and connectors
    The pack includes an adapter with a US/UK/EU plug of your choice and high-quality connectors which prevent the cables from falling out.
Show more
"On a double brick house previously wired with a two wire double intercom and three monitors: We removed all components and used the 2N® 2Wire units with two flush mounted 2N® IP Force and three 2N® Indoor Touch screens with integrated CCTV Android APP."

Technical Parameters

Ethernet Interface
Connector type: RJ45
Speed: 10/100 Base T, half-duplex / full-duplex, auto-negotiation, IEEE 802.3af/at 40W, PoE+ compatible
Installation requirements
Cable type: 2-wire, Cat 5e, Cat 6 or similar
Impedance: 25Ω to 100Ω
Transfer range: max. 220m with Cat 6
Number: max. of 4 sets of convertor units per non-configurable switch
Transfer method
Access method: CSMA/CA and TDMA
Modulation method: Windowed OFDM
Frequency band: 1.8MHz to 30MHz
LED indicator lights
Power supply: Blue – power on
BNC: Green – connection on
PoE: Green – connection on
Electrical power supply
AC input: 100~240V AC, 50~60Hz
DC output: 48V DC / 0.84A~1.3A
Mechanical properties
Dimensions: 40 x 40 x 75mm (h x w x d)
Weight: 120g
Material: extruded aluminium
Operating temperature: -10°C – 50°C
Storage temperature: -30°C – 70°C
Show more

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentation
Software & firmware

Case Study

Example of Typical Connection

FAQ

Are you still looking for more information? Check out the frequently asked questions and answers.
See more

Technical Parameters

Ethernet Interface
Connector type: RJ45
Speed: 10/100 Base T, half-duplex / full-duplex, auto-negotiation, IEEE 802.3af/at 40W, PoE+ compatible
Installation requirements
Cable type: 2-wire, Cat 5e, Cat 6 or similar
Impedance: 25Ω to 100Ω
Transfer range: max. 220m with Cat 6
Number: max. of 4 sets of convertor units per non-configurable switch
Transfer method
Access method: CSMA/CA and TDMA
Modulation method: Windowed OFDM
Frequency band: 1.8MHz to 30MHz
LED indicator lights
Power supply: Blue – power on
BNC: Green – connection on
PoE: Green – connection on
Electrical power supply
AC input: 100~240V AC, 50~60Hz
DC output: 48V DC / 0.84A~1.3A
Mechanical properties
Dimensions: 40 x 40 x 75mm (h x w x d)
Weight: 120g
Material: extruded aluminium
Operating temperature: -10°C – 50°C
Storage temperature: -30°C – 70°C
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories
SW Applications
Sales Area

Selling Propositions

  • Ethernet including PoE over 2 wires
    Connect any IP device using a two-wire or coaxial cable, even in an analogue environment, or a site with limited IP infrastructure.
  • Long reach
    Powering the IP-connected devices via PoE is possible up to a distance of 220m, twice the maximum Ethernet specification cable length.
  • Up to four sets per installation
    You can connect up to four pairs of 2N® 2Wire convertor units to a single switch. This means you can connect an intercom to several indoor stations as well as an IP camera.
  • Easy installation
    No more configuring! At each end of the cable you just plug in one 2N® 2Wire unit and connect at least one of them to a power source.
  • Robust aluminium housing
    Thanks to its aluminium housing the 2N® 2Wire converter is rugged and resistant to mechanical damage.
  • Utilize existing cabling
    2N® 2Wire enables you to make use of existing wiring. You won’t have to lay new cables or do construction work.
  • Reliability
    The converter will not let you down. It is significantly more reliable, in comparison with alternatives, such as a WiFi connection.
  • Power supply and connectors
    The pack includes an adapter with a US/UK/EU plug of your choice and high-quality connectors which prevent the cables from falling out.
Show more

Technical Parameters

Ethernet Interface
Connector type: RJ45
Speed: 10/100 Base T, half-duplex / full-duplex, auto-negotiation, IEEE 802.3af/at 40W, PoE+ compatible
Installation requirements
Cable type: 2-wire, Cat 5e, Cat 6 or similar
Impedance: 25Ω to 100Ω
Transfer range: max. 220m with Cat 6
Number: max. of 4 sets of convertor units per non-configurable switch
Transfer method
Access method: CSMA/CA and TDMA
Modulation method: Windowed OFDM
Frequency band: 1.8MHz to 30MHz
LED indicator lights
Power supply: Blue – power on
BNC: Green – connection on
PoE: Green – connection on
Electrical power supply
AC input: 100~240V AC, 50~60Hz
DC output: 48V DC / 0.84A~1.3A
Mechanical properties
Dimensions: 40 x 40 x 75mm (h x w x d)
Weight: 120g
Material: extruded aluminium
Operating temperature: -10°C – 50°C
Storage temperature: -30°C – 70°C
Show more

Documents

Marketing documentation
Software & firmware
Request information