2N® Helios IP Vario
Variability for Everyone
The 2N® Helios IP Vario is a door intercom that perfectly combines the most advanced technology with a unique design. It is a variable communication system supporting both voice and video transmission. And all that in an IP environment using the SIP protocol.
I have been completely satisifed with the quality of service, the quality of product and the improvements it has brought to our organisation. A dynamic response to customer needs ensured that we recieved a security and communication solution that enabled us to fulfill our desire to rationalise communcation provision and safety for children.
Tim Roberts, Senior School Director, PBS
One of the requested features was increased security, and that is when 2N® Helios IP intercom is needed. The best benefit that our client can offer now thanks to the intercom is that smart houses equipped with tenLogic system can now enable video communication for all visitors.
Julija Firsova-Milovanović, manager, 2CON
From an IT and administration view, the 2N solution gave us a centralised communication system that made use of the existing infrastructure. The expansion unit has given us a great deal of flexibility, enabling every department to have at least one button. Additionally we were able to integrate it with our speech recognition enabled telephony solution, which means visitors can use the 2N solution to ask for anyone in the building and subsequently speak directly to them. In a building accommodating over 500 people, this has given us increased flexibility and security.
Keith Tudge, Deputy Server Manager, ITM Components, Ltd.
We were looking for an IP intercom that could be connected to a Cisco IP branch exchange and which also met the very strict security standards of UniCredit Bank. The solution had to be easy to install and could not be a burden for the IT department. Thanks to a recommendation from the project designers, we selected 2N IP intercoms.
Ing. Pavel Lindner, Manager of Infrastructure Services, UniCredit Bank
Extenders do expand the number of quick dial button up to 54 buttons. Suitable for appartement buildings, or large office buildings.
Boxes and hoods for mounting in various settings.
Mask: 129 x 240 x 41 mm
Hole: 110 x 220 x 50 mm
Order no: 9135361E
Replacement name plates to replace damaged plates.
Modules expanding the functions of the basic unit.
Enables control of a secondary device, NO/NC passive contacts. Time unlimited switching up to 48 V / 2 A.
Order no: 9137310E
Internal RFID card reader for installation in the basic module of the 2N® Helios IP Vario intercom. Allows the use of EM4100, EM4102 and HID Proximity cards. Another two switches, two logical inputs and a Wiegand interface are available. It is compatible with all 2N® Helios IP Vario models.
Order no: 9137430E
A handy add-on that significantly enhances door entry security as it prevents tampering with the intercom and forced opening of the lock. To be installed between intercom and lock, powered by the intercom.
Order no: 9159010
Standalone IP device which can be controlled by HTTP commands sent by Helios IP intercom, which can thus control devices on unlimited distance.
Order no: 9137410E
The 2N® Helios IP Wiegand Isolator is designed for galvanic isolation of two devices separately power supplied and interconnected via the Wiegand bus. The 2N® Helios IP Wiegand Isolator protects the interconnected devices against communication errors and/or damage.
Order no: 9159011
Secondary reader for connection to an internal reader. Allows control of card entry from both sides of the door. IP68 cover, also suitable for exteriors. Reads EM4100 and EM4102 cards.
Order no: 9159030
Secondary reader for connection to an internal reader. Allows control of card entry from both sides of the door. IP68 cover, also suitable for exteriors. Reads Mifare cards.
Order no: 9159031
External RFID card reader for connection to a PC using a USB interface. Suitable for system management and the addition of EM41xx cards via the PC application, 2N® Helios IP Manager.
Order no: 9137420E
The 2N® 2Wire converter allows you to use existing wiring (2 wires) from your original door bell or door intercom to connect any IP device. You don’t have to configure anything, and you only need one 2N® 2Wire unit at each end of the cable and a power source connected to at least one of these units. The 2N® 2Wire unit then provides PoE power not only to the second converter, but also to all other connected IP end devices.
Order no: 9159014EU, 9159014US, 9159014UK
Electric door locks powered by Helios IP intercoms are recommended.
BEFO 11221 12V/230mA DC. For opening of the lock a short electrical impuls is sufficient, which unlocks the lock. Lock is then open until someone closes the door.
Order no: 932081E
BEFO 11211MB 12V/230mA DC. Enables mechanically close or open the lock. When opened, the lock is open all the time. When closed, it behaves as standart electrical lock.
Order no: 932091E
A regular lock with a built-in contact to indicate whether the door is open or closed.
Order no: 932061E
The failsafe lock is closed when electricity is switched on. When electricity is interrupted, the lock is opened.
Order no: 932072E
Accessories for ensuring electrical power for intercoms.
For power supply of intercom via ethernet cable when PoE switch is not available.
Order no: 91378100, 91378100E, 91378100US
Stabilised 12 V / 2 A power supply needs to be used when no PoE is available.
Order no: 91341481E
GXV3240 is the successor to the popular GXV3140 model, which allows comfortable video calls in the IP network. Touchscreen and keyboard control.
Order no: 91378357
GXV3275 is the successor to the popular GXV3175 model, which allows comfortable video calls in the IP network. Touchscreen control.
Order no: 91378358
The elegant internal touch panel, 2N® Indoor Touch, is suitable for all 2N® Helios IP intercoms. On the panel’s display not only can you find out who is at the door, but also start a conversation with the visitor, open the lock or turn on the light in the entrance hall.
Order no: 91378365, 91378365WH