2N® Helios IP Force
An Entrance Guard That Can Handle Extreme Conditions
The 2N® Helios IP Force is an exceptionally sturdy IP intercom that will ensure you effortless communication with the people coming to your door, in combination with reliable security for your building entrance. It supports voice and video communication using the SIP protocol and can deal with the most demanding conditions.
Monitoring buildings using 2N® Helios IP Force is simplified by an integrated camera, which can take pictures at an angle of up to 120°, and which also has a night mode to more effectively capture people in front of the intercom.
Boxes and hoods for mounting in various settings.
Modules expanding the functions of the basic unit.
Enables control of a secondary device, passive time unlimited switching up to 48 V / 2 A or active switch 12 V / 700 mA. Also includes tamper switch to signal opening of the front panel.
Order no: 9151010
Internal RFID card reader for installation in 2N® Helios IP Force intercoms. Allows the use of EM4100, EM4102 and HID Proximity cards. Another two switches, two logical inputs and a Wiegand interface are available. It is compatible with the 2N® Helios IP Force two-button and pictogram models. It also includes a security switch to signal when the front panel is opened.
Order no: 9151011
An internal reader for RFID cards for installation in 2N® Helios IP Force. It allows the use of Mifare, HID iClass, DESFire and other standards, including NFC support – application for Android 2N® Mobile Key. The reader reads the uID card serial number. It includes two switches, two logical inputs and the Wiegand interface. The reader is compatible with models with two buttons and with models with pictograms. It also comes with a safety switch for indicating open front panel.
Order no: 9151017
An internal reader for RFID cards for installation in 2N® Helios IP Force. It allows the use of Mifare, HID iClass, DESFire and other standards, including NFC support – application for Android 2N® Mobile Key. The reader reads the secure PACS ID number from HID iClass cards or the uID serial number from other cards. It includes two switches, two logical inputs and the Wiegand interface. The reader is compatible with models with two buttons and with models with pictograms. It also comes with a safety switch for indicating open front panel.
Order no: 9151019
A handy add-on that significantly enhances door entry security as it prevents tampering with the intercom and forced opening of the lock. To be installed between intercom and lock, powered by the intercom.
Order no: 9159010
Standalone IP device which can be controlled by HTTP commands sent by Helios IP intercom, which can thus control devices on unlimited distance.
Order no: 9137410E
The 2N® Helios IP Wiegand Isolator is designed for galvanic isolation of two devices separately power supplied and interconnected via the Wiegand bus. The 2N® Helios IP Wiegand Isolator protects the interconnected devices against communication errors and/or damage.
Order no: 9159011
Secondary reader for connection to an internal reader. Allows control of card entry from both sides of the door. IP68 cover, also suitable for exteriors. Reads EM4100 and EM4102 cards.
Order no: 9159030
Secondary reader for connection to an internal reader. Allows control of card entry from both sides of the door. IP68 cover, also suitable for exteriors. Reads Mifare cards.
Order no: 9159031
External RFID card reader for connection to a PC using a USB interface. Suitable for system management and the addition of EM41xx cards via the PC application, 2N® Helios IP Manager.
Order no: 9137420E
The 2N® 2Wire converter allows you to use existing wiring (2 wires) from your original door bell or door intercom to connect any IP device. You don’t have to configure anything, and you only need one 2N® 2Wire unit at each end of the cable and a power source connected to at least one of these units. The 2N® 2Wire unit then provides PoE power not only to the second converter, but also to all other connected IP end devices.
Order no: 9159014EU, 9159014US, 9159014UK
Set for installation on a door, enabling the status of door opening to be ascertained. Used when the intercom is used for door protection, to detect when the door is not closed or forced open.
Order no: 9159012
A button for connection to a logic input for opening a door inside a building.
Order no: 9159013
External RFID card reader for connection to PC using a USB interface. Suitable for system administration and adding 13.56MHz and 125kHz cards using a web interface or the 2N® Access Commander application. It reads the same types of cards as card readers in 2N Helios IP intercoms.
Order no: 9137421E
An induction loop transmits sound wirelessly from the 2N Helios IP intercom to the earphones of people with hearing disabilities and enables them to hear and perceive sounds better.
Order no: 9159050
External power supply for the induction loop.
Input 230V AC
Output 12V DC
Order no: 9159052
Electric door locks powered by Helios IP intercoms are recommended.
BEFO 11221 12V/230mA DC. For opening of the lock a short electrical impuls is sufficient, which unlocks the lock. Lock is then open until someone closes the door.
Order no: 932081E
BEFO 11211MB 12V/230mA DC. Enables mechanically close or open the lock. When opened, the lock is open all the time. When closed, it behaves as standart electrical lock.
Order no: 932091E
A regular lock with a built-in contact to indicate whether the door is open or closed.
Order no: 932061E
The failsafe lock is closed when electricity is switched on. When electricity is interrupted, the lock is opened.
Order no: 932072E
Accessories for ensuring electrical power for intercoms.
For power supply of intercom via ethernet cable when PoE switch is not available.
Order no: 91378100, 91378100E, 91378100US
Stabilised 12 V / 2 A power supply needs to be used when no PoE is available.
Order no: 91341481E
GXV3240 is the successor to the popular GXV3140 model, which allows comfortable video calls in the IP network. Touchscreen and keyboard control.
Order no: 91378357
GXV3275 is the successor to the popular GXV3175 model, which allows comfortable video calls in the IP network. Touchscreen control.
Order no: 91378358
The elegant internal touch panel, 2N® Indoor Touch, is suitable for all 2N® Helios IP intercoms. On the panel’s display not only can you find out who is at the door, but also start a conversation with the visitor, open the lock or turn on the light in the entrance hall.
Order no: 91378365, 91378365WH