2N® Helios IP Audio Kit
Voice Communication for All Types of Devices
The 2N® Helios IP Audio Kit is an OEM intercom for manufacturers of various devices, such as parking systems, information boards, industrial equipment or ATMs. Once installed in your system, it will enable you to enjoy not only audio communication, remote monitoring and control, but it will also handle your connection with the user. This gives you an advantage over the competition and provides your customers with the comfort of a live operator and the option of seeking advice by merely pushing a button.
Our existing technology had become extremely outdated, and we needed reliable IP equipment for our parking systems
from someone who had experience with a similar solution. 2N offered us the 2N® Helios IP Audio Kit solution, which mens our requirements, and we were pleasantly surprised by the quality and software of this simplified VoIP solution.
Tomáš Zdobnický, Technical Director, GREEN Center
Modules expanding the functions of the basic unit.
A handy add-on that significantly enhances door entry security as it prevents tampering with the intercom and forced opening of the lock. To be installed between intercom and lock, powered by the intercom.
Order no: 9159010
Standalone IP device which can be controlled by HTTP commands sent by Helios IP intercom, which can thus control devices on unlimited distance.
Order no: 9137410E
Electret microphone with self-adhesive layer. Sensitivity 42dB, operating temperature 5-35°C. Adhesion surface 25x25 mm. Must be protected from water penetration.
Order no: 9154001
Speaker with self-adhesive layer. External dimensions 60x60 mm, actual speaker diameter 45 mm. Must be protected from water penetration.
Order no: 9154002
Set for installation on a door, enabling the status of door opening to be ascertained. Used when the intercom is used for door protection, to detect when the door is not closed or forced open.
Order no: 9159012
The 2N® 2Wire converter allows you to use existing wiring (2 wires) from your original door bell or door intercom to connect any IP device. You don’t have to configure anything, and you only need one 2N® 2Wire unit at each end of the cable and a power source connected to at least one of these units. The 2N® 2Wire unit then provides PoE power not only to the second converter, but also to all other connected IP end devices.
Order no: 9159014EU, 9159014US, 9159014UK
Electric door locks powered by Helios IP intercoms are recommended.
BEFO 11221 12V/230mA DC. For opening of the lock a short electrical impuls is sufficient, which unlocks the lock. Lock is then open until someone closes the door.
Order no: 932081E
BEFO 11211MB 12V/230mA DC. Enables mechanically close or open the lock. When opened, the lock is open all the time. When closed, it behaves as standart electrical lock.
Order no: 932091E
A regular lock with a built-in contact to indicate whether the door is open or closed.
Order no: 932061E
The failsafe lock is closed when electricity is switched on. When electricity is interrupted, the lock is opened.
Order no: 932072E
Accessories for ensuring electrical power for intercoms.
Stabilised 12 V / 2 A power supply needs to be used when no PoE is available.
Order no: 91341481E
GXV3240 is the successor to the popular GXV3140 model, which allows comfortable video calls in the IP network. Touchscreen and keyboard control.
Order no: 91378357
GXV3275 is the successor to the popular GXV3175 model, which allows comfortable video calls in the IP network. Touchscreen control.
Order no: 91378358
The elegant internal touch panel, 2N® Indoor Touch, is suitable for all 2N® Helios IP intercoms. On the panel’s display not only can you find out who is at the door, but also start a conversation with the visitor, open the lock or turn on the light in the entrance hall.
Order no: 91378365, 91378365WH