2N® Access Unit
Simple to install access control system
The 2N® Access Unit is a reliable access system using IP technology. With an eye-catching representative design, it is also sure to please with its simplicity, as it only consists of an autonomous IP RFID card reader, which also supports NFC technology, embedded with a controller in a single compact device. All you need to do is connect it to your own LAN network, and then configure it with ease via a web interface. The 2N® Access Unit offers a great price to performance ratio and is the ideal solution for small and medium firms.
IP RFID and NFC reader, the 2N® Access Unit, combines all standardly used equipment - such as conventional readers, door controllers and IP converters into a single device. This makes both installation and operation of the access system as simple and low-cost as possible.
Intercoms and readers from 2N help us to satisfy the increasingly sophisticated demands of our customers. What’s more, their installation and setup is not complicated. We appreciate that all intercoms from 2N and the new 2N® Access Unit readers have the same settings and can be easily administered remotely.
Patrik LENHART, OAZA-NET s.r.o.
Boxes and hoods for mounting in various settings.
It allows connection of a 2N® Access Unit to a LAN through an Ethernet cable with an RJ45 connector (the connection to a LAN without the use of this cable is through a contact block).
Order no: 916020
Allows connection of modules located at a greater distance from the base unit. Suitable for connection of departure reader or keyboard.
Order no: 9155050
Enables installation on glass or uneven surfaces
Dimensions: 107 x 130mm
Order no.: 9155061
frame for installation in the wall
Order No.: 9155011
frame for installation on the surface
Order No.: 9155021
Flush mounted box for walls or plasterboard for 1 module
Opening in walls: 108 (w) x 136 (h) x 45 (d) mm
Order no: 9155014
It allows the use of EM4100, EM4102 and HID Proximity cards.
Order No.: 9155032
It allows the use of Mifare, HID iClass and DESFire cards and other standards. The reader reads the uID card serial number.
Order No.: 9155033
It allows the use of Mifare, HID iClass and DESFire cards and other standards, including NFC support – application for Android 2N® Mobile Key. The reader reads the uID card serial number.
Order No.: 9155040
Modules expanding the functions of the basic unit.
Set for installation on a door, enabling the status of door opening to be ascertained. Used when the 2N® Access Unit is used for door protection, to detect when the door is not closed or forced open.
Order no: 9159012
A button for connection to a logic input for opening a door inside a building.
Order no: 9159013
External RFID card reader for connection to a PC using a USB interface. Suitable for system management and the addition of 125kHz cards using a web interface or the 2N® Access Commander application.
Order no: 9137420E
Electric door locks powered by Helios IP intercoms are recommended.
BEFO 11221 12V/230mA DC. For opening of the lock a short electrical impuls is sufficient, which unlocks the lock. Lock is then open until someone closes the door.
Order no: 932081E
BEFO 11211MB 12V/230mA DC. Enables mechanically close or open the lock. When opened, the lock is open all the time. When closed, it behaves as standart electrical lock.
Order no: 932091E
A regular lock with a built-in contact to indicate whether the door is open or closed.
Order no: 932061E
The failsafe lock is closed when electricity is switched on. When electricity is interrupted, the lock is opened.
Order no: 932072E
Accessories for ensuring electrical power for intercoms.