2N® NetStar IP

------------------------------------------
------ NetStar v3.1.x changelog ----------
------------------------------------------


****************** DŮLEŽITÉ!!! **********************
Poté, co provedete upgrade na firmware 3.1.x:

- Stavové diody na telefonech (BLF) budou fungovat pro sledování stavů uživatelů, ne jednotlivých stanic
- Actoclip routing bude fungovat pro hovory i SMS současně
- Počítání volných minut lze použít pouze na portech, které mají v nastavení zatrhnuto "Hovor na přenašeči je účtován"
- Routery akceptují znak + jako součást čísla
- Pro správnou funkci programovacího nástroje je vyžadován .NET Framework 4 (bude automaticky nainstalován pokud není na daném PC k dispozici)
- Program NS Admin vytvoří kopii stromu ústředen (a připojení) ze starších verzí. Toto se provede pouze 1x během prvního spuštění ihned po instalaci nástroje 3.1.x, další PBX (a připojení) přidané do starších verzí konfiguračního nástroje nebudou s tímto novým nástrojem automaticky synchronizovány

------------------------------------------------------


************************************************************************************************************************
**** Firmware 3.1.3 ****

New features:

NS Admin improvements:
- Možnost mazání objektu pomocí tlačítka "DELETE" na klávesnici

NS Assistant improvements

************************************************************************************************************************
**** Firmware 3.1.2 ****

New features:

NS Admin improvements:

- Při smazání komplexního routeru se objevila chybová hláška - opraveno

NS Assistant improvements

************************************************************************************************************************
**** Firmware 3.1.1 ****

Nové vlastnosti:
- NOVÝ OBJEK : Switch router - Možnost ovlivnit routování volbou DTMF
- Podpora 64 kanálové VoIP karty
- Možnost resetu UMTS modulu po určitém počtu hovorů - globálně pro všechnya moduly, nebo jednotlivě
- T38 Zlepšení detekce a přenosu faxu po sipu

Vylepšení NS administrátoru:
- Globalní data - Progree t=óny - Tab - Tóny- Congestio: opravena možnost změnit střídu
- Global data - Naplánované úlohy - vylepšení (Odeber vše, možnost editovat uložené úlohy)
- V přáípadě, že proces ukládání dat do ústřredny je náročny na objem dat, bude uživatel upozorněn pomocí progress baru
- Opraveno nahrávání progres tónu uživatelem *56
- Další opravené nepřesnosti

Vylepšení NS assistantu:
- Možnost ovládání Přepínacího routeru v Asistentu
- Možnost přesměrování pro skupinu přes Asistant
- Automatické přepínání profilů přes NS Tray ikonu
- Úprava popisků v sekci stažení Tray ikony
- Možnost přepojení hovorů pro celou skupinu
- Opraven celkový počet zobrazovaných volných minut a SMS
- Možnost restartování SIP terminalů přímo z assistentu



************************************************************************************************************************
**** Firmware 3.1.0 ****
Nové vlastnosti:
- Podpora RTCP
- Hovorové sloty pro systémové (Cornet) telefony. Pokud má uživatel zapnutou frontu, může přepínat mezihovory ve frontě
- StarPoint 40T - na displeji telefonu lze zobrazit identifikaci pro jednotlivé hovory (hovorové sloty) čekající ve frontě
- Podpora StarPoint 30T
- Naplánované události - aktuálně je možné naplánovat: restart PBX, Restart UMTS karet, odesílání stavových zpráv a zálohu konfigurace
- Podpora nových Switch karet s až 4 E1 porty ( 1011008Q , 1011008E )
- Automatická konfigurace 2N SIP telefonů (SIP provisioning)
- Podpora BLF pro 2N IP telefony
- Fronta nad svazky
- Nový rourovací objekt: Status control
- Maximální délka hovoru
- Zlepšená detekce obsazovacího tónu
- Profily pro lepší detekci DTMF
- Interkom pro 2N IP telefony
- Uživatelské nastavení 2N IP telefonů prostřednictvím 2N Asistenta
- Indikace zmeškaných hovorů na 2N IP telefonech: pokud je odbavený hovor některým z uživatelů, na které bylo routováno ve svazku strategií "zvoň vše" nezobrazí se na displeji ostatních uživatelů zmeškaný hovor
- Více nastavení pro Jitter buffer
- Nový firmware pro VoIP kartu (Surf 7_0_1_1)
- Podpora kodeku iLBC 30 ms
- Nové možnosti definice intervalů pro restart volných minut
- AOC na DSS1 - podpora tarifikačních plsů na DSS1
- Podpora překladu kodeků na SIP


Vylepšení stávajících vlastností:
- Autoclip tabulku lze sdílet pro SMS a hovory současně
- SMS callback: SMS může být definována s nebo bez prodlevy pro callback
- Trace analyzer: dvojklikem nad položkou trace analyzátoru se otevře příslušná zpráva v klasickém trace
- Lepší administrátorský pohled v NS Asistentu
- Přehled čerpání volných minut v asistentu (pro administrátora). Administrátor může dobít jednotlivé volné minuty
- Dobíjení volných minut v libovolných intervalech
- tlačítko pro přeposlání příchozí SMS v NS Asistantu
- Starpoint 40T optimalizace rychlosti
- Nahrávání hovorů do *.wav
- Nahrávání hovorů: nyní je možné zvolit strategii ukládání nahraných hovorů mezi FIFO (přemazávání nejstarších souborů po dosažení limitu) a neomezeným počtem uložených souborů (s tím, že z NetStaru budou viditelné pouze soubory v rámci stanoveného limitu (max 15000)
- Větší imunita proti výpadkům síťového úložiště


NS Admin vylepšení:
- Defaultní parametry pro skupinu uživatelů
- Přímý link z nastavení stanice přímo na přenašeč
- Tisk aktuální konfigurace portů
- Lepší řazení přenašečů
- Možnost přidání komentáře ke každému řádku routeru
- Vylepšení seznamu ústředen - zobrazuje aktuální verzi offline databáze a verzi NS při posledním online připojení
- Nové menu pro vyzváněcí DISU
- Možnost uložení přístupových údajů během připojování PBX
- Podpora klávesových zkratek CTRL+F, Ins, Del
- Zobrazení sériového čísla v seznamu licencí
- Trace analyzer: dvojklik automaticky zobrazí danou část v trace
- Okno SIP proxy - optimalizace pro zobrazení většího počtu stanic
- Nový dialog pro přidání nového uživatele

------------------------------------------
------ NetStar v3.0.x changelog ----------
------------------------------------------

****************** IMPORTANT!!! **********************
After upgrade to firmware 3.0.x from 2.x.x

- For sending voicemail to e-mail and for sending e-mails to user: You have to create a station type e-mail and setup FROM PORT outing
- Call forwarding is not possible to setup for stations - only for users
------------------------------------------------------

*** Firmware 3.0.15 ***
Improvements:
- maddr atribute processing for better interconnection with Microsoft OCS/Lync
- CO line electric current limitation improvement

Fixed problems:
- Autoclip routing didn´t work if there was settuped "Keep number type of Incoming CLIP" as "Replace unknown" on Virtual port
- Memory and performance optimalization. Under full load there were no messages played



*** Firmware 3.0.14 ***
Improvements:
- support of ISDN CONNECT_ACK

Fixed problems:
- wrong format of wav file when backup function was used in NS
- SNMP v3 support
- Customized message for voicemail could be played two times
- NS Admin wizard = changed default HW profile
- T38 FAX channel alocation (500 Invalid Media Parameters)
- Calee identification could be changed during routing through the ring table



*** Firmware 3.0.13 ***
Improvements:
- ASSISTANT - more possibilities to find the record
- Changes for CO line [default Impedance,overvoltage protection]
- Default: Busy Tone Israel
- DTMF det. profile


Fixed problems:
- DSP Issue, Can fix problems: recording, conference, memory. . .
- Progress is not deleted after recording new one
-


*** Firmware 3.0.12 ***
Improvements:
- memory monitoring, Assistant memory optimalization, more information in the “bug” packages

Fixed problems:
- Recording could stop if TAPI dialling is used
- Incorect tones fall down hierarchy and priority
- Record route in SIP - NS was not sending all parameters
- Audio in AUX port after more calls could stop
- UMTS module reset - if sms at no answer and a call was sended together



*** Firmware 3.0.11 ***
Improvements:
- Changes for Default IN/Default OUT parameters - tone settings



*** Firmware 3.0.10 ***
Improvements:
- sheduled UMTS restart / PBX restart
- PC Operator - support of dialed number in queue (you can see what number was dialled before entering the queue)

Fixed problems:
- ISDN modem changes. Different chip is used
- UMTS card boot fix. Unsupported baud rate.
- Add new timeout for answer in each transaction according RFC RFC-3261. Default value 200s.
- Call recording fix. (call was not recorded if T38 was switched ON)
- T38 – fix for tone detection. Problem if recording and t38 was enabled together.
- CO Line fix. (co line can be stuck if it is a part of bundle configuration)
- Cornet display history (Fix for dialed number after call transfer)



*** Firmware 3.0.9 ***
Improvements:
- New Jitter Buffer for SIP

Fixed problems:
- Fix for DNS server
- 9# support for ME mode
- CO Line FIX



*** Firmware 3.0.8 ***
Improvements:
- Trusted IP addresses on SIP trunks – to protect NS from hacker´s attacks
- Free minutes settings

Fixed problems:
- CO line problem, busy tone detection
- Fix for UMTS card. Boot problem.
- GSM not allowed logout
- NS restarts after changing profile



*** Firmware 3.0.7 ***
Improvements:
- Trusted IP addresses on SIP trunks – to protect NS from hacker´s attacks

Fixed problems:
- Call to alerting disa from bundle causes routing to next row
- Forwarding has influence on paramer "wait with queue". [RING TABLE]
- NS crashes when using the service "DTMF to CTI" after DISA
- Bad order of ringing extensions in Cyclic bundle
- The parsing of time stamp for call recording and incoming SMS in the Internal Assistant is not showing correctly



*** Firmware 3.0.6 ***
Fixed problems:
- Critical memory leak
- Missing AOC record if user has forwarding activated
- Reset when user changes profile
- Service Unavailable after Reinvite with T.38
- Calling party number - octet 3a
- Incoming hold clip for external numbers
- UMTS audio parameters settings
- fix for "hold clip" func.



*** Firmware 3.0.5 ***
- Missing AOC record if user has forwarding activated
- Service Unavailable after Reinvite with T.38



*** Firmware 3.0.4 ***
Improvements:
- Row copy to all colomns (in a router or Id tab)

Fixed problems:
- SIM card topping up by USSD
- T.38 support for CISCO (X-cap header)
- Labels printing issue in IE8
- Call transfer from ME extension on SIP issue



*** Firmware 3.0.3 ***
Improvements:
- SMS Call Back - max timeout [s,m,h] – you can specify exact time the system calls you back
- Assistant Server - Win 2008, Win 7 and Vista support (Apache 2.2)
- DSS1 synchronisation for NT ports
- P-Asserted-Identity option (important for CLIR calls over SIP)
- Cornet phone busy information in Event reporter
- Incoming hold clip for SIP phones
- Hang Up AT command pro Sierra Wirelless - AT+CHLD=0
- Extension number presentation during entering the conference room

Fixed problems:
- Complex Router default destination routing
- Presentation Restricted transmission in CLIP Router
- SMS at no answer not working if routed through DISA
- BRI Port didn't keep level 1 enable it's always down
- After changing user language from Assistant, properties aren´t set up
- “Prepare to print” button missing if the key modul s18 is connected to OpenStage T40



*** Firmware 3.0.2 ***
Improvements:
- Audio profile settings
- New progress for "Maintenance progress"
- New progress for "Reset Profile"
- Admin in Assistant can see recorded calls
- Diacritical marks support in SMTP server
- Admin in Assistant can see the owners of time conditions
Fixed problems:
- Fix of intercom on OpenStage T40 extender S18
- Fix of doubled extensions in combo boxes
- ACK not recognized by NS on SIP stack



*** Firmware 3.0.1 ***
Improvements:
- FORCE CLIP + new Display CLIP for bundles and ring groups (you can change presentation of caller if the call terminates in ring group or bundle)
- CTI - add HANG UP for SIP extensions
- Busy tone detection

Fixed problems:
- call transfer for SNOM
- SIP - Original caller number not work in transferred
- A Fix for DSP (CPU – Tone detection, DISA, DTMF)
- FIX for Database backup



**** Firmware 3.0.0 ****
New features:
- Call Recording + Assistant management
- Free minutes management
- Free SMS management
- UMTS board support
- SMTP/ SMTPD port (email to sms/ sms to email)
- Queue for user
- Support for Siemens OpenStage / OptiPoint
- Automatic backup DB
- Blinking LED when call to GSM
- Allocation strategy in bundle - By credit, ALL
- Repeat destinations in bundle
- Logout, login to position in bundle
- Cause object in bundle (you can specify causes which will be used for routing to another destination)
- NEW Complex routers + routing on progress info
- CLIR support / Automatic CLIR
- SIP load balancing via SRV[NAPTR]
- BTS info for GSM/UMTS
- MMC card support 512MB < 2GB
- Storage Manager for VoiceMail, Call Recording, Backup of DB
- Call prefix for each number / group to Assistant
- DHCP Server for SIP phones

Improvements:
- When station busy = user busy
- Binary port can be activated during ringing (switch on/off by ring)
- Emergency mode support (if no licence, it will still route emergency numbers to PSTN)
- Exception for Emergency numbers if GSM DID active
- COPY of Profile
- Time conditional to Identification table (different identification during day/night)
- Request-URI add (transport=udp;lr)
New deffault settings:
- Deffault out settings for ICT Enabled is YES
- VoIP Card - Firmware VER. 6.0.1.3 [fix FAX issue, DTMF detector issue]
- G729 ANEX B = NO (possibility to disable/deny ANEX B)
Fixed problems:
- ISDN BRI fixed problem (BRI + DSL modem)
- Fix: SIP terminals hold after entry into service or conference room
- Fix: FSK CLIP problem

------------------------------------------
------ NetStar v3.0.x changelog ----------
------------------------------------------

****************** IMPORTANT!!! **********************
After upgrade to firmware 3.0.x from 2.x.x

- For sending voicemail to e-mail and for sending e-mails to user: You have to create a station type e-mail and setup FROM PORT outing
- Call forwarding is not possible to setup for stations - only for users
------------------------------------------------------


*** Firmware 3.0.14 ***
Improvements:
- support of ISDN CONNECT_ACK

Fixed problems:
- wrong format of wav file when backup function was used in NS
- SNMP v3 support
- Customized message for voicemail could be played two times
- NS Admin wizard = changed default HW profile
- T38 FAX channel alocation (500 Invalid Media Parameters)
- Calee identification could be changed during routing through the ring table



*** Firmware 3.0.13 ***
Improvements:
- ASSISTANT - more possibilities to find the record
- Changes for CO line [default Impedance,overvoltage protection]
- Default: Busy Tone Israel
- DTMF det. profile


Fixed problems:
- DSP Issue, Can fix problems: recording, conference, memory. . .
- Progress is not deleted after recording new one
-


*** Firmware 3.0.12 ***
Improvements:
- memory monitoring, Assistant memory optimalization, more information in the “bug” packages

Fixed problems:
- Recording could stop if TAPI dialling is used
- Incorect tones fall down hierarchy and priority
- Record route in SIP - NS was not sending all parameters
- Audio in AUX port after more calls could stop
- UMTS module reset - if sms at no answer and a call was sended together



*** Firmware 3.0.11 ***
Improvements:
- Changes for Default IN/Default OUT parameters - tone settings



*** Firmware 3.0.10 ***
Improvements:
- sheduled UMTS restart / PBX restart
- PC Operator - support of dialed number in queue (you can see what number was dialled before entering the queue)

Fixed problems:
- ISDN modem changes. Different chip is used
- UMTS card boot fix. Unsupported baud rate.
- Add new timeout for answer in each transaction according RFC RFC-3261. Default value 200s.
- Call recording fix. (call was not recorded if T38 was switched ON)
- T38 – fix for tone detection. Problem if recording and t38 was enabled together.
- CO Line fix. (co line can be stuck if it is a part of bundle configuration)
- Cornet display history (Fix for dialed number after call transfer)



*** Firmware 3.0.9 ***
Improvements:
- New Jitter Buffer for SIP

Fixed problems:
- Fix for DNS server
- 9# support for ME mode
- CO Line FIX



*** Firmware 3.0.8 ***
Improvements:
- Trusted IP addresses on SIP trunks – to protect NS from hacker´s attacks
- Free minutes settings

Fixed problems:
- CO line problem, busy tone detection
- Fix for UMTS card. Boot problem.
- GSM not allowed logout
- NS restarts after changing profile



*** Firmware 3.0.7 ***
Improvements:
- Trusted IP addresses on SIP trunks – to protect NS from hacker´s attacks

Fixed problems:
- Call to alerting disa from bundle causes routing to next row
- Forwarding has influence on paramer "wait with queue". [RING TABLE]
- NS crashes when using the service "DTMF to CTI" after DISA
- Bad order of ringing extensions in Cyclic bundle
- The parsing of time stamp for call recording and incoming SMS in the Internal Assistant is not showing correctly



*** Firmware 3.0.6 ***
Fixed problems:
- Critical memory leak
- Missing AOC record if user has forwarding activated
- Reset when user changes profile
- Service Unavailable after Reinvite with T.38
- Calling party number - octet 3a
- Incoming hold clip for external numbers
- UMTS audio parameters settings
- fix for "hold clip" func.



*** Firmware 3.0.5 ***
- Missing AOC record if user has forwarding activated
- Service Unavailable after Reinvite with T.38



*** Firmware 3.0.4 ***
Improvements:
- Row copy to all colomns (in a router or Id tab)

Fixed problems:
- SIM card topping up by USSD
- T.38 support for CISCO (X-cap header)
- Labels printing issue in IE8
- Call transfer from ME extension on SIP issue



*** Firmware 3.0.3 ***
Improvements:
- SMS Call Back - max timeout [s,m,h] – you can specify exact time the system calls you back
- Assistant Server - Win 2008, Win 7 and Vista support (Apache 2.2)
- DSS1 synchronisation for NT ports
- P-Asserted-Identity option (important for CLIR calls over SIP)
- Cornet phone busy information in Event reporter
- Incoming hold clip for SIP phones
- Hang Up AT command pro Sierra Wirelless - AT+CHLD=0
- Extension number presentation during entering the conference room

Fixed problems:
- Complex Router default destination routing
- Presentation Restricted transmission in CLIP Router
- SMS at no answer not working if routed through DISA
- BRI Port didn't keep level 1 enable it's always down
- After changing user language from Assistant, properties aren´t set up
- “Prepare to print” button missing if the key modul s18 is connected to OpenStage T40



*** Firmware 3.0.2 ***
Improvements:
- Audio profile settings
- New progress for "Maintenance progress"
- New progress for "Reset Profile"
- Admin in Assistant can see recorded calls
- Diacritical marks support in SMTP server
- Admin in Assistant can see the owners of time conditions
Fixed problems:
- Fix of intercom on OpenStage T40 extender S18
- Fix of doubled extensions in combo boxes
- ACK not recognized by NS on SIP stack



*** Firmware 3.0.1 ***
Improvements:
- FORCE CLIP + new Display CLIP for bundles and ring groups (you can change presentation of caller if the call terminates in ring group or bundle)
- CTI - add HANG UP for SIP extensions
- Busy tone detection

Fixed problems:
- call transfer for SNOM
- SIP - Original caller number not work in transferred
- A Fix for DSP (CPU – Tone detection, DISA, DTMF)
- FIX for Database backup



**** Firmware 3.0.0 ****
New features:
- Call Recording + Assistant management
- Free minutes management
- Free SMS management
- UMTS board support
- SMTP/ SMTPD port (email to sms/ sms to email)
- Queue for user
- Support for Siemens OpenStage / OptiPoint
- Automatic backup DB
- Blinking LED when call to GSM
- Allocation strategy in bundle - By credit, ALL
- Repeat destinations in bundle
- Logout, login to position in bundle
- Cause object in bundle (you can specify causes which will be used for routing to another destination)
- NEW Complex routers + routing on progress info
- CLIR support / Automatic CLIR
- SIP load balancing via SRV[NAPTR]
- BTS info for GSM/UMTS
- MMC card support 512MB < 2GB
- Storage Manager for VoiceMail, Call Recording, Backup of DB
- Call prefix for each number / group to Assistant
- DHCP Server for SIP phones

Improvements:
- When station busy = user busy
- Binary port can be activated during ringing (switch on/off by ring)
- Emergency mode support (if no licence, it will still route emergency numbers to PSTN)
- Exception for Emergency numbers if GSM DID active
- COPY of Profile
- Time conditional to Identification table (different identification during day/night)
- Request-URI add (transport=udp;lr)
New deffault settings:
- Deffault out settings for ICT Enabled is YES
- VoIP Card - Firmware VER. 6.0.1.3 [fix FAX issue, DTMF detector issue]
- G729 ANEX B = NO (possibility to disable/deny ANEX B)
Fixed problems:
- ISDN BRI fixed problem (BRI + DSL modem)
- Fix: SIP terminals hold after entry into service or conference room
- Fix: FSK CLIP problem

------------------------------------------
------ NetStar v3.x.x changelog ----------
------------------------------------------

*** Firmware 3.0.12 ***
Improvements:
xxx - memory monitoring, Assistant memory optimalization, more information in the “bug” packages

Fixed problems:
- Recording could stop if TAPI dialling is used
- Incorect tones fall down hierarchy and priority
- Record route in SIP - NS was not sending all parameters
- Audio in AUX port after more calls could stop
- UMTS module reset - if sms at no answer and a call was sended together



*** Firmware 3.0.11 ***
Improvements:
- Changes for Default IN/Default OUT parameters - tone settings



*** Firmware 3.0.10 ***
Improvements:
- sheduled UMTS restart / PBX restart
- PC Operator - support of dialed number in queue (you can see what number was dialled before entering the queue)

Fixed problems:
- ISDN modem changes. Different chip is used
- UMTS card boot fix. Unsupported baud rate.
- Add new timeout for answer in each transaction according RFC RFC-3261. Default value 200s.
- Call recording fix. (call was not recorded if T38 was switched ON)
- T38 – fix for tone detection. Problem if recording and t38 was enabled together.
- CO Line fix. (co line can be stuck if it is a part of bundle configuration)
- Cornet display history (Fix for dialed number after call transfer)



*** Firmware 3.0.9 ***
Improvements:
- New Jitter Buffer for SIP

Fixed problems:
- Fix for DNS server
- 9# support for ME mode
- CO Line FIX



*** Firmware 3.0.8 ***
Improvements:
- Trusted IP addresses on SIP trunks – to protect NS from hacker´s attacks
- Free minutes settings

Fixed problems:
- CO line problem, busy tone detection
- Fix for UMTS card. Boot problem.
- GSM not allowed logout
- NS restarts after changing profile



*** Firmware 3.0.7 ***
Improvements:
- Trusted IP addresses on SIP trunks – to protect NS from hacker´s attacks

Fixed problems:
- Call to alerting disa from bundle causes routing to next row
- Forwarding has influence on paramer "wait with queue". [RING TABLE]
- NS crashes when using the service "DTMF to CTI" after DISA
- Bad order of ringing extensions in Cyclic bundle
- The parsing of time stamp for call recording and incoming SMS in the Internal Assistant is not showing correctly



*** Firmware 3.0.6 ***
Fixed problems:
- Critical memory leak
- Missing AOC record if user has forwarding activated
- Reset when user changes profile
- Service Unavailable after Reinvite with T.38
- Calling party number - octet 3a
- Incoming hold clip for external numbers
- UMTS audio parameters settings
- fix for "hold clip" func.



*** Firmware 3.0.5 ***
- Missing AOC record if user has forwarding activated
- Service Unavailable after Reinvite with T.38



*** Firmware 3.0.4 ***
Improvements:
- Row copy to all colomns (in a router or Id tab)

Fixed problems:
- SIM card topping up by USSD
- T.38 support for CISCO (X-cap header)
- Labels printing issue in IE8
- Call transfer from ME extension on SIP issue



*** Firmware 3.0.3 ***
Improvements:
- SMS Call Back - max timeout [s,m,h] – you can specify exact time the system calls you back
- Assistant Server - Win 2008, Win 7 and Vista support (Apache 2.2)
- DSS1 synchronisation for NT ports
- P-Asserted-Identity option (important for CLIR calls over SIP)
- Cornet phone busy information in Event reporter
- Incoming hold clip for SIP phones
- Hang Up AT command pro Sierra Wirelless - AT+CHLD=0
- Extension number presentation during entering the conference room

Fixed problems:
- Complex Router default destination routing
- Presentation Restricted transmission in CLIP Router
- SMS at no answer not working if routed through DISA
- BRI Port didn't keep level 1 enable it's always down
- After changing user language from Assistant, properties aren´t set up
- “Prepare to print” button missing if the key modul s18 is connected to OpenStage T40



*** Firmware 3.0.2 ***
Improvements:
- Audio profile settings
- New progress for "Maintenance progress"
- New progress for "Reset Profile"
- Admin in Assistant can see recorded calls
- Diacritical marks support in SMTP server
- Admin in Assistant can see the owners of time conditions
Fixed problems:
- Fix of intercom on OpenStage T40 extender S18
- Fix of doubled extensions in combo boxes
- ACK not recognized by NS on SIP stack



*** Firmware 3.0.1 ***
Improvements:
- FORCE CLIP + new Display CLIP for bundles and ring groups (you can change presentation of caller if the call terminates in ring group or bundle)
- CTI - add HANG UP for SIP extensions
- Busy tone detection

Fixed problems:
- call transfer for SNOM
- SIP - Original caller number not work in transferred
- A Fix for DSP (CPU – Tone detection, DISA, DTMF)
- FIX for Database backup



**** Firmware 3.0.0 ****
New features:
- Call Recording + Assistant management
- Free minutes management
- Free SMS management
- UMTS board support
- SMTP/ SMTPD port (email to sms/ sms to email)
- Queue for user
- Support for Siemens OpenStage / OptiPoint
- Automatic backup DB
- Blinking LED when call to GSM
- Allocation strategy in bundle - By credit, ALL
- Repeat destinations in bundle
- Logout, login to position in bundle
- Cause object in bundle (you can specify causes which will be used for routing to another destination)
- NEW Complex routers + routing on progress info
- CLIR support / Automatic CLIR
- SIP load balancing via SRV[NAPTR]
- BTS info for GSM/UMTS
- MMC card support 512MB < 2GB
- Storage Manager for VoiceMail, Call Recording, Backup of DB
- Call prefix for each number / group to Assistant
- DHCP Server for SIP phones

Improvements:
- When station busy = user busy
- Binary port can be activated during ringing (switch on/off by ring)
- Emergency mode support (if no licence, it will still route emergency numbers to PSTN)
- Exception for Emergency numbers if GSM DID active
- COPY of Profile
- Time conditional to Identification table (different identification during day/night)
- Request-URI add (transport=udp;lr)
New deffault settings:
- Deffault out settings for ICT Enabled is YES
- VoIP Card - Firmware VER. 6.0.1.3 [fix FAX issue, DTMF detector issue]
- G729 ANEX B = NO (possibility to disable/deny ANEX B)
Fixed problems:
- ISDN BRI fixed problem (BRI + DSL modem)
- Fix: SIP terminals hold after entry into service or conference room
- Fix: FSK CLIP problem



------------------------------------------------------
****************** IMPORTANT!!! **********************
------------------------------------------------------
If you are upgrading from fw 2.x.x
- For sending voicemail to e-mail and for sending e-mails to user: You have to create a station type e-mail and setup FROM PORT outing
- Call forwarding is not possible to setup for stations - only for users

- Důvěryhodné IP adresy u SIP GW (bezpečností pojistka proti útokům hackerů)
- Oprava restartu NS po změně profilu
- Oprava časové značky u nahraných hovorů v NS Assistantu
- Oprava cyklické strategie u svazku (routování na další řádek po timeoutu u poslední stanice v pořadí)
- Oprava vyzváněcí Disy (pokud je zaroutováno ze svazku do DISy a v ní na obsazenou stanici – hovor je nyní korektně ukončen)